Rollers for pallet trucks from Blickle

Rollers for pallet trucks from Blickle

Suitable wheels and castors for all industrial trucks

Pallet trucks are used to lift and transport heavy loads both indoors and outdoors. The rollers which they use need to be high-quality, robust and extremely wear-resistant.

That goes for all industrial trucks. Rollers for pallet trucks are also used for forklift trucks. Essentially, they are used for any application which involves moving and transporting loads either manually or using an electric drive system. Transport vehicles also use a number of other wheel types, including forklift truck wheels, front wheels, running wheels, heavy duty wheels, drive wheels and stabilisation springs.

Blickle is an OEM supplier

OEM – We are an original equipment manufacturer. That means that we provide rollers for pallet trucks and forklift truck wheels for a number of transport vehicle manufacturers. Examples are

  • Jungheinrich
  • Still
  • BT
  • Fenwick-Linde
  • Stöcklin
  • Rocla
  • Wagner
  • Mic
  • Pimespo
  • Prat
  • Steinbock
  • Loc
  • Lugli
  • BV
  • Atlet

Are you looking for a replacement wheel or replacement tyre for a particular model? Then we're your expert partner. Send us a request or contact your personal sales representative.

Various treads to suit your individual needs

Different applications require different rollers. The castor you should choose depends to a large extent on external factors, such as the condition of the indoor or outdoor surface, or whether the vehicle is driven manually or electrically. This has an impact on characteristics like dynamic load capacity, resistance to environmental factors, marking behaviour and noise levels. We provide a wide range of products to meet all of these requirements.

We manufacture wheels and castors for industrial trucks using a variety of tread materials and wheel centre materials. Each material has specific features which meet different requirements. We make castors for pallet trucks using polyurethane treads or nylon. An additional version with an elastic solid rubber tread is available for front wheels. Polyurethane and elastic solid rubber versions are available for drive wheels, forklift truck wheels and running wheels. Polyurethane treads are highly abrasion-resistant, have a high resistance to cut and tear propagation and are non-marking. Elastic solid rubber wheels are also quiet and abrasion-resistant while providing operational comfort and very good floor preservation properties.

Passive rollers for pallet trucks are available in sizes between 60 and 90 mm diameter, while the actively driven forklift trucks have wheel diameters in excess of 100 mm. They have a load capacity of up to 1,200 kg.

An overview of the wheel and castor series is provided below:

Series Description Wheel Ø Load capacity Versions Special features
Series HTH:
made from high-quality, reaction-injected polyurethane-elastomer Blickle Extrathane, hardness 92 Shore A, wheel centre made of steel or grey cast iron
60 – 90 mm 180 – 840 kg with and without ball bearing, with Blickle Softhane polyurethane tread, splashproof and washproof version
  • low-noise operation
  • low rolling resistance
  • good floor preservation
  • high abrasion resistance, very high cut and tear propagation resistance
  • non-marking, non-staining
Series HB:

made from high-quality, reaction-injected polyurethane-elastomer Blickle Besthane®, hardness 92 Shore A, wheel centre made of steel or grey cast iron

80 – 85 mm 440 – 730 kg with and without ball bearing, hydrolysis-resistant with nylon wheel centre, splashproof and washproof version
  • low-noise operation
  • low rolling resistance
  • high dynamic load capacity
  • good floor preservation
  • very high abrasion resistance, high cut and tear propagation resistance
  • non-marking, non-staining
Series HTHW:
made from high-quality, reaction-injected polyurethane-elastomer Blickle Extrathane, hardness 92 Shore A, wheel centre made of steel or grey cast iron with ball bearing
82 – 85 mm 440 – 840 kg with Blickle Softhane or Blickle Besthane polyurethane tread
  • low-noise operation
  • low rolling resistance
  • high abrasion resistance, very high cut and tear propagation resistance
  • good floor preservation
  • splashproof and washproof
  • non-marking, non-staining
Series HPO:
made of high-quality, impact-resistant nylon 6, hardness 70 Shore D, with ball bearing
80 – 85 mm 420 – 1100 kg with corrosion-resistant ball bearing, made of compressed cast nylon for higher load capacities
  • easy rolling on smooth surfaces
  • very abrasion-resistant
Front wheels:

made of high-quality elastic solid rubber ‘Blickle EasyRoll’, made of high-quality, reaction-injected polyurethane-elastomer Blickle Softhane® or Blickle Extrathane, made from high-quality impact-resistant nylon 6

180 – 200 mm

550 – 800 kg  
 
ALTH, GTH, VSTH heavy duty wheels:
made from high-quality, reaction-injected polyurethane-elastomer Blickle Extrathane, hardness 92 Shore A, ball bearing
100 – 150 mm 350 – 1100 kg wheel centre made of die-cast aluminium (ALTH), steel (VSTH) or grey cast iron (GTH)
  • low-noise operation
  • low rolling resistance
  • good floor preservation
  • high abrasion resistance, very high cut and tear propagation resistance
  • non-marking, non-staining

GB heavy duty wheel :
made from high-quality, reaction-injected polyurethane-elastomer Blickle Besthane®, hardness 92 Shore A, wheel centre made of grey cast iron with ball bearing
100 – 180 mm 400 – 1100 kg bei 4km/h
240 – 700 kg bei 10km/h
hydrolysis-resistant, with cast nylon wheel centre
  • low-noise operation
  • low rolling resistance
  • high dynamic load capacity
  • good floor preservation
  • very high abrasion resistance, high cut and tear propagation resistance
  • non-marking, non-staining
Series RTH:
made from high-quality, reaction-injected polyurethane-elastomer Blickle Extrathane, hardness 92 Shore A, wheel centre made of grey cast iron or graphite grey cast iron
    suitable for Atlet, BT, BV, Fenwick-Linde, Jungheinrich, Loc, Lugli, Mic, Pimespo, Prat, Roda, Steinbock, Still, Stöcklin, Wagner
  • low-noise operation
  • low rolling resistance
  • good floor preservation
  • high abrasion resistance, very high cut and tear propagation resistance
  • non-marking, non-staining
Series REV:
high-quality elastic solid rubber tyres in drive quality, 70 Shore A
    suitable for BT, BV, Fenwick-Linde, Jungheinrich, Mic, Still; non-marking version in grey (BT)
  • very high operational comfort
  • low-noise operation
  • very good floor preservation
  • abrasion-resistant
Series RB:
made from high-quality, reaction-injected polyurethane-elastomer Blickle Besthane®, hardness 92 Shore A, wheel centre made of grey cast iron
    suitable for BT, Fenwick-Linde, Jungheinrich, Still, Wagner
  • low-noise operation
  • low rolling resistance
  • high dynamic load capacity
  • good floor preservation
  • very high abrasion resistance, high cut and tear propagation resistance
  • non-marking, non-staining

 

An overview of all of our wheels and castors for transport vehicles is available in our product range.

Are you looking for a specific product? You can use filter criteria in our product finder to restrict your search and find the right castor or wheel for you.

Special solutions are our expertise

Unable to find what you’re looking for in our extensive product range? Because industrial vehicles are so varied and used in such a wide range of conditions, the requirements for their running gear components are frequently extremely specific. Perhaps you have extremely limited installation space or need specific damping characteristics. In addition to our standard products, we have years of experience in designing special solutions. We will meet you in person before creating the perfect castor or wheel to meet your requirements. Let us know what you need.

Follow this link to send your request!