Wheel series

Wheels for a wide range of applications

  • 01 Wheels for light-duty and transport equipment castors
    TPA
    VPA
    POES
    ALES
    PATH
    POA
    VPP-125
    VE
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    TPA
    50–200 mm
    50–250 kg
    high-quality thermoplastic rubber-elastomer (TPE), colour grey
    to material description

    high-quality polypropylene, impact resistant, colour silver grey (“-ELS” version colour black)

    chemically bonded
    85 Shore A
    good
    very good
    satisfactory
    -20 °C to +60 °C
    plain bore, roller bearing, ball bearing (C)
    • electrically conductive, non-marking, grey (-ELS)
    • thread guard with ball bearing seal (-KFD)
    • stainless steel roller bearing (-XR)
    • the load capacity reduces at ambient temperatures above +30 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    • oil containing, staining possible
    VPA
    50–150 mm
    40–130 kg
    high-quality solid rubber, colour grey
    to material description
    high-quality nylon 6 or polypropylene in the version “-EL”, impact resistant, colour black
    pressed-on tyre
    80 Shore A
    very good
    good
    suffi cient
    20 °C to +60 °C
    plain bore, ball bearing
    • electrically conductive, black tyre, marking (-EL)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +30 °C
    POES
    80–200 mm
    110–350 kg
    high-quality elastic solid rubber “Blickle SoftMotion”, colour grey
    to material description
    high-quality nylon 6, impact resistant, colour black
    vulcanised tyre
    55 Shore A
    excellent
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing (C), ball bearing (CC)
    • thread guard with ball bearing seal (-KAD / -KFD)
    • stainless steel ball bearing and thread guard (-XKA / -XKF)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) and ball bearing (CC) with integrated synthetic thread guard as standard
    ALES
    150–250 mm
    280–440 kg
    high-quality elastic solid rubber “Blickle SoftMotion”, colour grey
    to material description
    die-cast aluminium, colour silver grey
    vulcanised tyre
    55 Shore A
    excellent
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • the load capacity reduces at ambient temperatures above +60 °C
    PATH
    50–200 mm
    75–500 kg
    high-quality thermoplastic polyurethane (TPU), colour dark grey
    to material description
    high-quality nylon 6, impact resistant, colour silver grey
    chemically bonded
    94 Shore A
    good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    plain bore, roller bearing, ball bearing (C)
    • electrically conductive, non-marking, grey (-ELS)
    • thread guard with ball bearing seal (-KAD / -KFD)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    POA
    35–150 mm
    75–280 kg
    high-quality nylon 6, impact resistant, colour black
    to material description
    high-quality nylon 6, impact resistant, colour black
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    plain bore, ball bearing (C)
    • the load capacity reduces at ambient temperatures above +35 °C
    VPP
    80–400 mm
    50–350 kg
    standard solid rubber, colour black
    to material description
    high-quality polypropylene, impact resistant, colour black
    pressed-on tyre
    80 Shore A
    very good
    satisfactory
    sufficient
    -20 °C to +60 °C
    plain bore, roller bearing, ball bearing
    • non-marking, grey tyre (-SG)
    • stainless steel roller bearing (-XR)
    • STARLOCK® cap made from stainless steel (ST-KA...)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +30 °C
    VE
    80–200 mm
    50–205 kg
    standard solid rubber, colour black
    to material description
    pressed steel, zinc-plated, blue-passivated, Cr6-free
    tyre pressed with rim
    80 Shore A
    very good
    satisfactory
    sufficient
    -25 °C to +80 °C
    roller bearing
    • non-marking, grey tyre (-SG)
    • electrically conductive (-EL)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +60 °C
  • 02 Wheels for transport equipment and heavy-duty castors
    V
    VWPP
    VW
    RD
    POEV-200
    ALEV
    SE
    GEV
    DS
    PK
    PS-430
    VLE
    POTH
    POTHS
    ALTH
    SETH
    VSTH
    GTH
    ALST
    GST
    ALB
    GB
    POBS
    ALBS
    GVU
    PPN
    PP
    POW
    PO
    SPO
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    V
    80–400 mm
    50–800 kg
    standard solid rubber, colour black
    to material description
    pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-free
    tyre pressed with rim
    80 Shore A
    very good
    satisfactory
    sufficient
    -20 °C to +80 °C
    plain bore, roller bearing, ball bearing
    • non-marking, grey tyre (-SG)
    • electrically conductive (-EL)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • centrally-pressed rim: special impact and shock-resistant design (-EL)
    • award-winning design (“Die gute Industrieform”)
    VWPP
    125–260 mm
    50–200 kg
    soft rubber “Blickle Soft”, round profile, colour black, wheel Ø 260 mm with additional hard rubber core
    to material description
    high-quality polypropylene, impact resistant, colour black
    pressed-on tyre
    50 Shore A
    excellent
    good
    satisfactory
    -20 °C to +60 °C
    plain bore, roller bearing, ball bearing
    • non-marking, grey tyre (-SG)
    • stainless steel roller bearing (-XR)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +30 °C
    VW
    125–260 mm
    50–200 kg
    soft rubber “Blickle Soft”, round profile, colour black, wheel Ø 260 mm with additional hard rubber core
    to material description
    pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-free
    tyre pressed with rim
    50 Shore A
    excellent
    good
    satisfactory
    -20 °C to +80 °C
    roller bearing, ball bearing
    • non-marking, grey tyre (-SG)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • centrally-pressed rim: special impact and shock-resistant design
    • award-winning design (“Die gute Industrieform”)
    RD
    100–280 mm
    100–650 kg
    two-component solid rubber “Blickle Comfort”, hard rubber core and highly elastic tread, colour black
    to material description
    pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-free
    tyre pressed with rim
    65 Shore A
    very good
    good
    satisfactory
    -20 °C to +80 °C
    roller bearing, ball bearing
    • non-marking, grey tyre, 56 Shore A (-VLI)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • centrally-pressed rim: special impact and shock-resistant design
    • award-winning design (“Die gute Industrieform”)
    POEV
    60–300 mm
    120–650 kg
    high-quality elastic solid rubber “Blickle EasyRoll” in smooth rolling quality, colour black
    to material description
    high-quality nylon 6, impact resistant, colour black
    vulcanised tyre
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    plain bore, roller bearing, ball bearing (C), ball bearing (CC), ball bearing
    • non-marking, grey tyre (-SG)
    • non-marking, blue tyre (-SB)
    • electrically conductive (-EL)
    • stainless steel roller bearing (-XR)
    • thread guard with ball bearing seal (-KAD / -KFD)
    • stainless steel ball bearing and thread guard (-XKA / -XKF)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    • electrically conductive version (-EL) with increased rolling resistance
    • wheels with ball bearing (C) and ball bearing (CC) with integrated synthetic thread guard as standard
    ALEV
    100–250 mm
    200–650 kg
    high-quality elastic solid rubber “Blickle EasyRoll” in smooth rolling quality, colour black
    to material description
    die-cast aluminium, colour silver grey
    vulcanised tyre
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • non-marking, grey tyre (-SG)
    • antistatic, non-marking, grey tyre (-SG-AS)
    • electrically conductive (-EL)
    • the load capacity reduces at ambient temperatures above +60 °C
    • electrically conductive version (-EL) with increased rolling resistance
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    SE
    80–415 mm
    200–1,150 kg
    high-quality elastic solid rubber “Blickle EasyRoll” in smooth rolling quality, colour black
    to material description
    thick-walled pressed steel, with tubular steel hub, triple welded, lacquered, colour anthracite (version -SG: lacquered, silver colour) wheel Ø 80–125 mm made from high-quality nylon 6, impact resistant, colour black
    vulcanised or steel-wire reinforced tyre, pressed-on
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • non-marking, grey tyre (-SG)
    • grease nipple (-NI)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel centre particularly resistant to dirt, impact and shocks
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    GEV
    250–620 mm
    870–4,540 kg
    high-quality elastic solid rubber in smooth rolling quality, colour black
    to material description
    rugged grey cast iron, with grease nipple, lacquered, colour anthracite
    steel-wire reinforced tyre, pressed-on
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • non-marking, natural colour tyre (-SN)
    • hub cap for use as end wheel (-E)
    • drive wheel with hub keyway (see series GEVN)
    • hub fitting wheel (see series GEVA) (see series GEVA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel centre is approximately 4 mm wider than the specified wheel width
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    DS
    300–500 mm
    1,800–4,580 kg
    high-quality elastic solid rubber in smooth rolling quality, colour black
    to material description
    very strong welded steel construction, with tubular steel hub, with grease nipple, lacquered, colour anthracite
    steel-wire reinforced tyre, pressed-on
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • hub cap for use as end wheel (-E)
    • drive wheel with hub keyway (see series DSN)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel centre is approximately 4 mm wider than the specified wheel width
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    PK
    200–400 mm
    75–250 kg
    pneumatic tyre, ribbed or zig-zag profile, 2-ply rating, colour black
    to material description
    high-quality polypropylene, impact resistant, colour black
    tyre mounted on rim
    60 Shore A
    excellent
    good
    satisfactory
    -20 °C to +50 °C
    plain bore, roller bearing, ball bearing
    • rim colour red (-ROT)
    • puncture-proof soft rubber wheel (see series VWPP)
    • the load capacity reduces at ambient temperatures above +30 °C
    • wheel width and diameter can change during operation
    P
    180–415 mm
    50–525 kg
    pneumatic tyre, ribbed or zig-zag profile, 2 or 4 ply rating, colour black
    to material description
    pressed steel, bolted (flat base rim) or triple welded drop base rim, zinc-plated, blue-passivated, Cr6-free or lacquered, colour silver
    tyre mounted on rim
    60 Shore A
    excellent
    good
    satisfactory
    -20 °C to +50 °C
    plain bore, roller bearing, ball bearing
    • non-marking, grey tyre (-SG)
    • puncture-proof foam-filled tyre (-AG), slightly reduced compression and operational comfort
    • hub cap for use as end wheel (-E)
    • puncture-proof soft rubber wheel (see series VW)
    • hub fitting wheel (see series PA)
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    • wheel width and diameter can change during operation
    PS
    300–536 mm
    450–1,300 kg
    pneumatic tyre, zig-zag profile, 6, 8 or 10 ply rating, colour black
    to material description
    heavy pressed steel, bolted (flat base rim), with welded tubular steel hub, zinc-plated, blue-passivated, Cr6-free
    tyre mounted on rim
    60 Shore A
    excellent
    good
    satisfactory
    -20 °C to +50 °C
    ball bearing
    • hub cap for use as end wheel (-E)
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    • wheel width and diameter can change during operation
    VLE
    250–525 mm
    450–1,885 kg
    super-elastic solid rubber, 2-component or 3-component tyres, tough rubber core, highly elastic, abrasion- resistant tread, colour black
    to material description
    heavy pressed steel, bolted, with welded tubular steel hub or reinforced rim version, zinc-plated, blue-passivated, Cr6-free
    steel-wire reinforced tyre, mounted on rim
    70 Shore A
    very good
    good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • non-marking, grey tyre (-SG)
    • antistatic, black tyre (-AS)
    • hub cap for use as end wheel (-E)
    • hub fitting wheel (see series VLEA) (see series VLEA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel width and diameter can change during operation
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    • puncture-proof and maintenance- free
    POTH
    75–250 mm
    200–1,000 kg
    high-quality thermoplastic polyurethane (TPU), colour dark grey
    to material description
    high-quality nylon 6, impact resistant, colour natural white
    chemically bonded
    94 Shore A
    good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    plain bore, roller bearing, ball bearing (C), ball bearing
    • stainless steel roller bearing (-XR)
    • stainless steel ball bearing (-XK)
    • stainless steel ball bearing and thread guard (-XKA)
    • thread guard with ball bearing seal (-KAD)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    POTHS
    100–200 mm
    200–550 kg
    high-quality thermoplastic polyurethane (TPU), colour blue
    to material description
    high-quality nylon 6, impact resistant, colour natural white
    chemically bonded
    80 Shore A
    very good
    very good
    good
    -20 °C to +70 °C temporarily up to +90 °C
    plain bore, roller bearing, ball bearing (C), ball bearing
    • stainless steel roller bearing (-XR)
    • stainless steel ball bearing (-XK)
    • stainless steel ball bearing and thread guard (-XKA)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    ALTH
    80–250 mm
    200–1,250 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    die-cast aluminium, colour silver grey
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • extremely crowned tread (-CO)
    • antistatic, non-marking, grey (-AS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    SETH
    125–250 mm
    500–1,350 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    thick-walled pressed steel, triple welded, with tubular steel hub, lacquered, colour silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • grease nipple (-NI)
    • the load capacity reduces at ambient temperatures above +40 °C
    • wheel centre particularly resistant to dirt, impact and shocks
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    VSTH
    35–125 mm
    100–540 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    steel
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • the load capacity reduces at ambient temperatures above +40 °C
    GTH
    100–1,000 mm
    450–30,000 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing, spherical roller bearing
    • antistatic, non-marking, grey (-AS)
    • drive wheel with hub keyway (see series GTHN)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    ALST
    80–300 mm
    200–1,150 kg
    high-quality polyurethane elastomer Blickle Softhane®, colour green
    to material description
    die-cast aluminium, colour silver grey
    cast tread
    75 Shore A
    very good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • antistatic, non-marking, grey (-AS)
    • extremely crowned tread (-CO)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    GST
    125–400 mm
    450–3,000 kg
    high-quality polyurethane elastomer Blickle Softhane®, colour green
    to material description
    rugged grey cast iron, with grease nipple from wheel Ø 160 mm, lacquered, colour silver
    cast tread
    75 Shore A
    very good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • antistatic, non-marking, grey (-AS)
    • drive wheel with hub keyway (see series GSTN)
    • hub fitting wheel (see series GSTA)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    ALB
    100–250 mm
    400–1,250 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    die-cast aluminium, colour silver grey
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    VSB
    80 mm
    500 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    steel
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • the load capacity reduces at ambient temperatures above +40 °C
    GB
    100–1,000 mm
    450–30,000 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silver
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing, spherical roller bearing
    • electrically conductive, non-marking (-ELS)
    • cast nylon wheel centre, hydrolysis resistant, (see series GSPOB)
    • drive wheel with hub keyway (see series GBN)
    • hub fitting wheel (see series GBA)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    POBS
    80–200 mm
    140–500 kg
    high-quality polyurethane elastomer Blickle Besthane® Soft, colour blue
    to material description
    high-quality nylon 6, impact resistant, colour black
    cast tread
    75 Shore A
    very good
    excellent
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing (C), ball bearing (CC)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) and ball bearing (CC) with integrated synthetic thread guard as standard
    ALBS
    80–300 mm
    200–1,150 kg
    high-quality polyurethane elastomer Blickle Besthane® Soft, colour blue
    to material description
    die-cast aluminium, colour silver grey
    cast tread
    75 Shore A
    very good
    excellent
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • nylon wheel centre, hydrolysis resistant, (see series POBS)
    • extremely crowned tread (-CO)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    GVU
    100–400 mm
    450–3,000 kg
    high-quality polyurethane elastomer Vulkollan®, colour natural
    to material description
    rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • drive wheel with hub keyway (see series GVUN)
    • hub fitting wheel (see series GVUA)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    PPN
    60–200 mm
    80–450 kg
    high-quality polypropylene, impact resistant, colour natural white
    to material description
    high-quality polypropylene, impact resistant, colour natural white
    60 Shore D
    satisfactory
    very good
    satisfactory
    -20 °C to +60 °C
    plain bore, roller bearing
    • stainless steel roller bearing (-XR)
    • electrically conductive (PP-EL series)
    • thread guard (-FA)
    • colour black (see PP series)
    • the load capacity reduces at ambient temperatures above +30 °C
    PP
    60–200 mm
    80–450 kg
    high-quality polypropylene, impact resistant, colour black
    to material description
    high-quality polypropylene, impact resistant, colour black
    60 Shore D
    satisfactory
    very good
    satisfactory
    -20 °C to +60 °C
    plain bore, roller bearing, ball bearing (C), ball bearing
    • electrically conductive, black (-EL)
    • stainless steel roller bearing (-XR)
    • thread guard (-FA)
    • colour natural white (see PPN series)
    • the load capacity reduces at ambient temperatures above +30 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    POW
    100–125 mm
    200–220 kg
    high-quality nylon 6, impact resistant, colour white
    to material description
    high-quality nylon 6, impact resistant, colour white highly elastic cushion layer made from elastic solid rubber, colour red
    highly elastic encapsulated cushion layer
    70 Shore D
    satisfactory
    very good
    good
    -20 °C to +80 °C
    ball bearing (C)
    • thread guard with ball bearing seal (-KFD)
    • the load capacity reduces at ambient temperatures above +35 °C
    • good noise absorption, absorbs impact and shocks
    • with integrated synthetic thread guard as standard
    • sandwich wheel
    PO
    50–300 mm
    75–1,500 kg
    high-quality nylon 6, impact resistant, colour natural white
    to material description
    high-quality nylon 6, impact resistant, colour natural white
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    plain bore, roller bearing, ball bearing (C), ball bearing
    • electrically conductive, non-marking, grey (-ELS)
    • stainless steel roller bearing (-XR)
    • stainless steel ball bearing (-XK)
    • stainless steel ball bearing and thread guard (-XKA)
    • grease nipple (-NI)
    • colour blue, non-marking (C5017)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    SPO
    75–250 mm
    300–2,000 kg
    high-quality nylon 6, impact resistant, extremely robust heavy-duty version, colour natural white
    to material description
    high-quality nylon 6, impact resistant, colour natural white
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    plain bore, ball bearing
    • stainless steel ball bearing (-XK)
    • grease nipple (-NI)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
  • 03 Wheels for heavy-duty castors 
    GSPO
    G
    SVS
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    GSPO
    35–1,000 mm
    100–50,000 kg
    high-quality cast nylon, impact resistant, colour natural beige
    material description
    high-quality cast nylon, impact resistant, colour natural beige
    80 Shore D
    satisfactory
    excellent
    very good
    -20 °C to +80 °C
    ball bearing, spherical roller bearing
    • plain bore for static loads or very low speeds
    • stainless steel ball bearing (-XK)
    • spherical roller bearing (-PR) for applications requiring extensive travel
    • the load capacity reduces at ambient temperatures above +35 °C
    G
    80–250 mm
    250–1,400 kg
    rugged grey cast iron, lacquered, colour silver
    material description
    rugged grey cast iron, with grease nipple
    180–220 HB
    sufficient
    excellent
    excellent
    -100 °C to +600 °C
    plain bore, ball bearing
    • heat-resistant ball bearing (oven bearing, -IK)
    • plain bore: provide adequate lubrication on a regular basis
    • the primary purpose of coating is to protect the wheel during transport and storage. Coating remains resistant up to +120 °C
    SVS
    65–300 mm
    750–15,000 kg
    heat-treatable steel, lightly-oiled surface
    to material description
    heat-treatable steel
    190–230 HB
    sufficient
    excellent
    excellent
    -20 °C to +120 °C
    ball bearing
    • spherical roller bearing (-PR) for applications requiring extensive travel
  • 04 Heat-resistant wheels
    VEHI
    VKHT
    POSI
    ALSI
    POH
    POHI
    PHN
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    VEHI
    100–200 mm
    65–180 kg
    highly heat-resistant solid rubber Blickle TempLine® Basic, colour black
    to material description
    pressed steel, zinc-plated, blue-passivated, Cr6-free
    tyre pressed with rim
    80 Shore A
    very good
    satisfactory
    sufficient
    -25 °C to +200 °C
    roller bearing
    • majority of tyre flattening recovers when in motion under load
    • passivation may be altered slightly in high temperatures, corrosion protection will remain unaffected
    VKHT
    100 mm
    100 kg
    highly heat-resistant solid rubber Blickle TempLine® Special, colour black
    to material description
    highly heat-resistant nylon 6, impact resistant, colour black
    pressed-on tyre
    85 Shore A
    good
    satisfactory
    satisfactory
    -30 °C to +260 °C
    plain bore
    • PTFE coated stainless steel axle tube (-XAT)
    • oven temperature temporarily up to +300 °C, wheel temperature must not exceed +260 °C
    • tyre flattening recovers when in motion under load
    POSI
    100–125 mm
    80–120 kg
    highly heat-resistant silicone rubber Blickle TempLine® Comfort, colour black
    to material description
    highly heat-resistant thermoplastic, impact resistant, colour dark grey
    vulcanised tyre
    75 Shore A
    very good
    good
    satisfactory
    -20 °C to +250 °C
    plain bore
    • non-marking, grey tyre (-SG)
    • PTFE coated stainless steel axle tube (-XAT)
    • oven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C
    • suitable for autoclaves
    ALSI
    100 mm
    100 kg
    highly heat-resistant silicone rubber Blickle TempLine® Comfort, colour black
    to material description
    die-cast aluminium, colour silver grey
    vulcanised tyre
    75 Shore A
    very good
    good
    satisfactory
    -25 °C to +250 °C
    plain bore, ball bearing
    • PTFE coated stainless steel axle tube (-XAT)
    • oven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C
    • ball bearing with heat-resistant special grease (HK) and ball bearing cover (HKA)
    POH
    80–200 mm
    215–720 kg
    highly heat-resistant nylon Blickle TempLine® PerformanceLight, impact resistant, colour natural
    to material description
    highly heat-resistant Blickle TempLine® PerformanceLight nylon, impact resistant, colour natural
    85 Shore D
    satisfactory
    excellent
    good
    -25 °C to +170 °C
    plain bore, ball bearing
    • PTFE coated stainless steel axle tube (-XAT)
    • stainless steel ball bearing with heat-resistant special grease (-HXK)
    • heavy-duty wheel centre for higher loads (series SPOH)
    • oven temperature temporarily up to +200 °C, wheel temperature must not exceed +170 °C
    • suitable for autoclaves (plain bore version and version with stainless steel ball bearing with heat-resistant special grease (-HXK)
    • long-term use in high temperatures may cause the colour to change, but will not affect load capacity
    POHI
    80–200 mm
    180–600 kg
    highly heat-resistant thermoplastic Blickle TempLine® Performance, impact resistant, colour dark grey
    to material description
    highly heat-resistant thermoplastic, impact resistant, colour dark grey
    85 Shore D
    satisfactory
    excellent
    satisfactory
    -25 °C to +250 °C
    plain bore, ball bearing
    • PTFE coated stainless steel axle tube (-XAT)
    • stainless steel ball bearing with heat-resistant special grease (-HXK)
    • suitable for autoclaves (plain bore version and version with stainless steel ball bearing with heat-resistant special grease (-HXK)
    PHN
    80–200 mm
    100–500 kg
    phenolic resin Blickle TempLine® Classic, impact resistant, colour black
    to material description
    Blickle TempLine® Classic phenolic resin, impact resistant, colour black
    90 Shore D
    satisfactory
    excellent
    sufficient
    -35 °C to +260 °C temporarily up to +300 °C
    plain bore, ball bearing
    • teflon-coated stainless steel axle tube (-XAT)
    • wheels are only conditionally suitable for uneven floors and crossing thresholds
  • 05 Guide rollers
    FPU
    FPTH
    FTH
    FSTH
    FPOB
    FSVU
    FPO
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    FPU
    25–60 mm
    15–100 kg
    high-quality thermoplastic polyurethane (TPU), colour brown
    to material description
    tread directly injected onto the ball bearing
    98 Shore A
    good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • electrically conductive, non-marking (-ELS)
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    FPTH
    60–125 mm
    110–290 kg
    high-quality thermoplastic polyurethane (TPU), colour dark grey
    to material description
    high-quality nylon 6, impact resistant, colour silver grey
    chemically bonded
    92 Shore A
    good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • electrically conductive, non-marking (-ELS)
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    • hydrolysis resistant
    FTH
    30–75 mm
    25–150 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    tread directly casted onto the ball bearing
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +40 °C
    FSTH
    40–125 mm
    60–375 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    steel
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • antistatic, non-marking, grey (-AS)
    • with aluminium wheel centre (series FALTH)
    • the load capacity reduces at ambient temperatures above +40 °C
    FPOB
    80–125 mm
    160–375 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    high-quality nylon 6, impact resistant, colour black
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C
    ball bearing
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    • hydrolysis resistant
    FSVU
    40–100 mm
    70–250 kg
    high-quality polyurethane elastomer Vulkollan®, colour natural
    to material description
    steel
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    FPO
    25–125 mm
    40–530 kg
    high-quality nylon 6, impact resistant, colour natural white
    to material description
    tread directly injected onto the ball bearing
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    ball bearing
    • electrically conductive, non-marking, grey (-ELS)
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
  • 06 Flanged wheels 
    SPKGSPO
    SPK
    SPKVS
    DSPKGSPO
    DSPK
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    SPKGSPO
    50–250 mm
    220–3,000 kg
    high-quality cast nylon, impact resistant, colour natural beige
    to material description
    high-quality cast nylon, impact resistant, colour natural beige
    80 Shore D
    satisfactory
    excellent
    very good
    -20 °C to +80 °C
    plain bore, ball bearing
    • stainless steel ball bearing (-XK)
    • drive wheel with hub keyway (see series SPKGSPON)
    • the load capacity reduces at ambient temperatures above +35 °C
    • load capacities apply for rail profi les A 45, A 55 (DIN 536)
    SPK
    50–250 mm
    400–3,500 kg
    rugged grey cast iron, colour silver
    to material description
    rugged grey cast iron, with grease nipple from wheel Ø 125 mm
    180–220 HB
    sufficient
    excellent
    excellent
    -100 °C to +600 °C
    plain bore, ball bearing
    • heat-resistant ball bearing (oven bearing, -IK)
    • plain bore: provide adequate lubrication on a regular basis
    • load capacities apply for rail profi les A 45, A 55 (DIN 536)
    • the primary purpose of coating is to protect the wheel during transport and storage. Coating remains resistant up to +120 °C
    SPKVS
    50–400 mm
    500–9,000 kg
    heat-treatable steel, lightly-oiled surface
    to material description
    heat-treatable steel
    190–230 HB
    sufficient
    excellent
    excellent
    -20 °C to +120 °C
    ball bearing
    • heat-resistant ball bearing (oven bearing, -IK)
    • spherical roller bearing (-PR) for applications requiring extensive travel
    • drive wheel with hub keyway (see series SPKVSN)
    • load capacities apply for rail profi les A 45, A 55 and A 65 (DIN 536)
    DSPKGSPO
    50–200 mm
    50–700 kg
    high-quality cast nylon, impact resistant, colour natural beige
    to material description
    high-quality cast nylon, impact resistant, colour natural beige
    80 Shore D
    satisfactory
    excellent
    very good
    -20 °C to +80 °C
    plain bore, ball bearing
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    DSPK
    50–200 mm
    120–1,200 kg
    heat-treatable steel, lightly-oiled surface
    to material description
    heat-treatable steel
    190–230 HB
    sufficient
    excellent
    excellent
    -20 °C to +120 °C
    ball bearing
  • 07 Drive wheels
    GEVN
    GTHN
    GSTN
    GBN
    GVUN
    SPKVSN
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    GEVN
    160–620 mm
    300–4,540 kg
    high-quality elastic solid rubber in drive-quality, with steel-band, colour black, wheel Ø 400+500 mm: Smooth rolling quality, steel-wire reinforced
    to material description
    rugged grey cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, colour anthracite
    steel-wired reinforced or pressed-on steel-band tyre
    65 Shore A
    very good
    good
    satisfactory
    -30 °C to +80 °C temporarily up to +100 °C
    hub keyway
    • pressed-on steel band in friction wheel quality (-STR)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel centre is approximately 4 mm wider than the specified wheel width
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    GTHN
    75–1,000 mm
    300–25,000 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    rugged grey cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, colour silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    hub keyway
    • antistatic, non-marking, grey (-AS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    GSTN
    75–500 mm
    200–4,200 kg
    high-quality polyurethane elastomer Blickle Softhane®, colour green
    to material description
    rugged grey cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, colour silver
    cast tread
    75 Shore A
    very good
    very good
    very good
    -30 °C to +70 °C temporarily up to +90 °C
    hub keyway
    • antistatic, non-marking, grey (-AS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    GBN
    100–1,000 mm
    400–25,000 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    rugged grey cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, colour silver
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    hub keyway
    • electrically conductive, non-marking (-ELS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    GVUN
    100–400 mm
    400–3,400 kg
    high-quality polyurethane elastomer Vulkollan®, colour natural
    to material description
    rugged grey cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, colour silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    hub keyway
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    SPKVSN
    200–300 mm
    2,500–7,000 kg
    heat-treatable steel, lightly-oiled surface
    to material description
    heat-treatable steel, axle bore and hub keyway in accordance with DIN 6885
    190–230 HB
    sufficient
    excellent
    excellent
    -100 °C to +600 °C
    hub keyway
    • load capacities apply for rail profiles A 45, A 55 and A 65 (DIN 536)
    • load capacity reduced by 50% at + 300 °C
  • 08 Hub fitting wheels
    PA-402
    VLEA
    GEVA
    GSTA
    GBA
    VSVU
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    PA
    400–536 mm
    250–1,300 kg
    pneumatic tyre, ribbed or zig-zag profile, 2 to 10 ply rating, colour black
    to material description
    pressed steel, with central hole, fixing holes are counter-sunk for installation on standard hub fl anges, zinc-plated, blue-passivated, Cr6-free or lacquered, silver colour
    tyre mounted on rim
    60 Shore A
    excellent
    good
    satisfactory
    -30 °C to +50 °C
    hub fitting
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    • wheel width and diameter can change during operation
    VLEA
    405–525 mm
    950–1,885 kg
    super-elastic solid rubber, 3-component tyre, highly-elastic cushion layer, abrasion-resistant tread, colour black
    to material description
    heavy pressed steel, bolted (flat base rim), with central hole, fixing holes are counter-sunk for installation on standard hub flanges, zinc-plated, blue-passivated, Cr6-free
    steel-wire reinforced tyre, mounted on rim
    70 Shore A
    very good
    good
    good
    -30 °C to +80 °C temporarily up to +100 °C
    hub fitting
    • non-marking, grey tyre (-SG)
    • antistatic, black tyre (-AS)
    • drive wheel with hub keyway (see series VLEN)
    • the load capacity reduces at ambient temperatures above +60 °C
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    • wheel width and diameter can change during operation
    • puncture-proof and maintenance- free
    GEVA
    250–620 mm
    630–4,540 kg
    high-quality elastic solid rubber in smooth rolling quality, colour black
    to material description
    rugged grey cast iron, with central hole, fixing holes are counter-sunk for installation on standard hub flanges, lacquered, colour anthracite
    steel-wire reinforced tyre, pressed-on
    65 Shore A
    very good
    very good
    satisfactory
    -30 °C to +80 °C temporarily up to +100 °C
    hub fitting
    • pressed-on steel band in drive quality (-STA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel centre is approximately 4 mm wider than the specified wheel width
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    GSTA
    200–400 mm
    700–2,500 kg
    high-quality polyurethane elastomer Blickle Softhane®, colour green
    to material description
    rugged grey cast iron, with central hole, fixing holes are counter-sunk for installation on standard hub flanges, lacquered, colour silver
    cast tread
    75 Shore A
    very good
    very good
    very good
    -30 °C to +70 °C temporarily up to +90 °C
    hub fitting
    • antistatic, non-marking, grey (-AS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    GBA
    200–400 mm
    900–3,400 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    rugged grey cast iron, with central hole, fixing holes are counter-sunk for installation on standard hub flanges, lacquered, colour silver
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    hub fitting
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    VSVU
    125–300 mm
    700–2,400 kg
    high-quality polyurethane elastomer Vulkollan®, colour natural
    to material description
    heat-treatable steel
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    axle bore
    • individual turning
    • wheel with clamping set
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
  • 09 Rollers for pallet trucks
    HTH
    HB
    HTHW
    HPO
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    HTH
    60–90 mm
    220–1,130 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    metal
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • with Blickle Softhane® polyurethane tread (see series HST)
    • splash and washproof version (see series HTHW)
    • wheel centre without ball bearing (ball bearing seat)
    • the load capacity reduces at ambient temperatures above +40 °C
    HB
    80–85 mm
    550–960 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    metal
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • nylon wheel centre, hydrolysis resistant, (see series HPOB)
    • splash and washproof version (see series HBW)
    • wheel centre without ball bearing (ball bearing seat)
    • the load capacity reduces at ambient temperatures above +40 °C
    HTHW
    82–85 mm
    550–1,060 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    metal
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • with Blickle Besthane® polyurethane tread (see series HBW)
    • with Blickle Softhane® polyurethane tread (see series HSTW)
    • the load capacity reduces at ambient temperatures above +40 °C
    • nylon socket for splash and washproof ball bearing
    HPO
    80–85 mm
    420–1,100 kg
    high-quality nylon 6, impact resistant, colour natural white
    to material description
    high-quality nylon 6, impact resistant, colour natural white
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    ball bearing
    • stainless steel ball bearing (-XK)
    • made from cast nylon, for applications requiring high load capacity (see HGSPO series)
    • the load capacity reduces at ambient temperatures above +35 °C
  • 10 Forklift truck wheels
    REV
    RTH
    RB
    RVU
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    REV
    215–254 mm
    high-quality elastic solid rubber in drive-quality, colour black REV 215x82/60-5-SG: grey, non-marking
    to material description
    rugged grey cast iron or ductile cast iron
    vulcanised or steel-wire reinforced tyre, pressed-on
    70 Shore A
    very good
    very good
    satisfactory
    -30 °C to +80 °C temporarily up to +100 °C
    • the load capacity reduces at ambient temperatures above +60 °C
    • drive wheels are suitable for the manufacturer number specified in the product range 
    RTH
    200–270 mm
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    rugged grey cast iron or ductile cast iron
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • drive wheels are suitable for the manufacturer number specified in the product range 
    RB
    230–343 mm
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    rugged grey cast iron or ductile cast iron
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • drive wheels are suitable for the manufacturer number specified in the product range 
    RVU
    230–250 mm
    high-quality polyurethane elastomer Vulkollan®, colour natural
    to material description
    rugged grey cast iron or ductile cast iron
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • drive wheels are suitable for the manufacturer number specified in the product range 
  • 11 Tyres
    BSEV
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    BSEV
    250–525 mm
    480–2,260 kg
    super-elastic solid rubber, 2-component or 3-component tyres, tough rubber core, highly elastic, abrasion-resistant tread, colour black
    to material description
    steel-wire reinforced
    70 Shore A
    very good
    good
    good
    -30 °C to +80 °C temporarily up to +100 °C
    • non-marking, grey tyre (-SG)
    • the load capacity reduces at ambient temperatures above +60 °C
    • tyre is suitable for the standard rims specified in the table in the product range 
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
  • 12 Press-on bands
    BEV-ZGD
    BEV-ZST
    BTH
    BB
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    BEV...-ZDG
    125–610 mm
    190–2,700 kg
    high-quality elastic solid rubber in smooth rolling quality, colour black
    to material description
    steel-wire reinforced
    65 Shore A
    very good
    very good
    good
    -30 °C to +80 °C temporarily up to +100 °C
    • non-marking, natural colour tyre (-SN)
    • the load capacity reduces at ambient temperatures above +60 °C
    • suitable for wheel centre with outer diameter tolerance h11
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    BEV...-ZST
    150–620 mm
    300–5,580 kg
    high-quality elastic solid rubber in drive-quality, colour black
    to material description
    steel-band
    vulcanised tread
    65 Shore A
    very good
    very good
    good
    -30 °C to +80 °C temporarily up to +100 °C
    • non-marking, natural colour tyre (-SN)
    • the load capacity reduces at ambient temperatures above +60 °C
    • suitable for wheel centre with outer diameter tolerance h11
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    BTH
    125–610 mm
    500–7,200 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    steel-band
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • suitable for wheel centre with outer diameter tolerance h11
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    BB
    125–645 mm
    500–12,000 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    steel-band
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • suitable for wheel centre with outer diameter tolerance h11
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
  • 13 Heat-resistant Progressus wheels for castors
    PGV
    ALTPU
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    PGV
    84–186 mm
    90–200 kg
    high-quality elastic solid rubber in smooth rolling quality, colour grey, non-marking
    to material description
    die-cast aluminium, colour silver grey
    tyre mounted on rim
    80 Shore A
    very good
    very good
    satisfactory
    -20 °C to +134 °C
    roller bearing, ball bearing
    • electrically conductive (-EL)
    • suitable for autoclaves
    • tyre flattening recovers when in motion under load
    ALTPU
    120–150 mm
    120–150 kg
    high-quality thermoplastic polyurethane (TPU), colour dark grey, non-marking, electrically conductive
    to material description
    die-cast aluminium, colour silver grey
    chemically bonded
    92 Shore A
    good
    very good
    very good
    -20 °C to +134 °C
    ball bearing
    • suitable for autoclaves
    • majority of tyre flattening recovers when in motion under load