PP…-EL – Wheel and castor series
Electrically conductive polypropylene wheels and castors
The wheels in the PP...-EL series are made from high-quality injection-moulded polypropylene. The wheels are highly resistant to a wide range of aggressive substances. With a hardness of 60 Shore D, they offer a particularly low level of rolling resistance and are electrically conductive, with a maximum resistance of 104 ohms.
The electrically conductive wheels and castors in the PP series are primarily used for industrial and commercial applications whenever sensitive goods need to be protected against electrical discharge.
-
PP…-EL – Wheels
The standard range of PP...-EL series contains wheels with diameters ranging between 100 and 200 millimetres. These wheels use ball bearings.
Wheel Ø
[mm]Wheel
width
[mm]Load capacity
at 4 km/h
[kg]Bearing type
Axle bore Ø
[mm]Hub
length
[mm]PP 100/8KA-EL 100 37 160 ball bearing (C) 8 46 To the product PP 125/8KA-EL 125 40 200 ball bearing (C) 8 46 To the product PP 150/20K-EL 150 50 300 ball bearing 20 60 To the product PP 200/20K-EL 200 50 450 ball bearing 20 60 To the product -
PP…-EL – Swivel castors with plate
As standard, the PP...-EL series is available with various bracket series with a top plate fitting. These vary in terms of their design:
LE series: Pressed steel swivel bracket with top plate fitting
L series: Pressed steel swivel bracket with top plate fitting, medium duty designThe guide provides a detailed comparison of the bracket series which are available. Suitable brake systems for each base product are listed in the relevant section.
Wheel Ø
[mm]Wheel
width
[mm]Load capacity
at 4 km/h
[kg]Bearing type
Total height
[mm]Plate
dimensions
[mm]Bolt hole
spacing
[mm]Bolt
hole Ø
[mm]Offset
[mm]LE-PP 100KA-EL 100 37 150 ball bearing (C) 125 100 x 85 80 x 60 9 36 To the product L-PP 100KA-EL 100 37 160 ball bearing (C) 125 100 x 85 80 x 60 9 36 To the product LE-PP 125KA-EL 125 40 150 ball bearing (C) 150 100 x 85 80 x 60 9 38 To the product L-PP 125KA-EL 125 40 200 ball bearing (C) 150 100 x 85 80 x 60 9 38 To the product LE-PP 150K-EL 150 50 300 ball bearing 190 140 x 110 105 x 75–80 11 54 To the product L-PP 150K-EL 150 50 300 ball bearing 190 140 x 110 105 x 75–80 11 60 To the product LE-PP 200K-EL 200 50 300 ball bearing 235 140 x 110 105 x 75–80 11 54 To the product L-PP 200K-EL 200 50 400 ball bearing 235 140 x 110 105 x 75–80 11 65 To the product -
PP…-EL – Swivel castors with bolt hole
In addition to the plate fitting, the PP…-EL series is also available with a bolt hole fitting for the following bracket series.
LER series: Pressed steel swivel bracket with bolt hole
A detailed description of the LER bracket series is available in the guide. The different brake systems available for each base product are listed in the relevant section.
Wheel Ø
[mm]Wheel
width
[mm]Load capacity
at 4 km/h
[kg]Bearing type
Total height
[mm]Plate Ø
[mm]Bolt
hole Ø
[mm]Offset
[mm]LER-PP 100KA-EL 100 37 150 ball bearing (C) 125 70 13 36 To the product LER-PP 125KA-EL 125 40 150 ball bearing (C) 150 70 13 38 To the product LER-PP 150K-EL 150 50 300 ball bearing 190 88 13 54 To the product LER-PP 200K-EL 200 50 300 ball bearing 235 88 13 54 To the product -
PP…-EL – Fixed castors
The following bracket series is a suitable fixed castor for the PP…-EL series:
B series: Pressed steel fixed bracket with top plate fitting, medium duty design
A detailed description of the bracket is available in our guide.
Wheel Ø
[mm]Wheel
width
[mm]Load capacity
at 4 km/h
[kg]Bearing type
Total height
[mm]Plate
dimensions
[mm]Bolt hole
spacing
[mm]Bolt
hole Ø
[mm]B-PP 100KA-EL 100 37 160 ball bearing (C) 125 100 x 85 80 x 60 9 To the product B-PP 125KA-EL 125 40 200 ball bearing (C) 150 100 x 85 80 x 60 9 To the product B-PP 150K-EL 150 50 300 ball bearing 190 140 x 110 105 x 75–80 11 To the product B-PP 200K-EL 200 50 400 ball bearing 235 140 x 110 105 x 75–80 11 To the product