VSTH – Wheel and castor series

Heavy duty wheels and castors with Blickle Extrathane® polyurethane tread and steel wheel centre

VSTH wheels and castors series with with Blickle Extrathane® polyurethane tread

The tread of the VSTH series consists of the high-quality polyurethane Blickle Extrathane® and has a hardness of 92 Shore A. This is cast onto the steel wheel centre. The tread is particularly resistant to sharp obstacles.

Thanks to its robust design, the VSTH series is also suitable for carrying heavy loads, even with a very small wheel diameter. These are listed in the Compact castors section.

VSTH – Wheels

Wheels in the VSTH series have diameters ranging between 35 and 80 mm. The wheels use a ball bearing.

	Wheel Ø [mm]	Wheel width [mm]	Load capacity at 4 km/h [kg]	Bearing type	Axle bore Ø [mm]	Hub length [mm]
VSTH 35/6K	35	27	100	ball bearing	6	30	To the product
VSTH 50/8K	50	33	150	ball bearing	8	36	To the product
VSTH 60/15K	60	35	200	ball bearing	15	35	To the product
VSTH 62/10K	60	60	320	ball bearing	10	60	To the product
VSTH 65/15K	65	40	250	ball bearing	15	40	To the product
VSTH 75/20K	75	40	270	ball bearing	20	40	To the product
VSTH 80/20K	80	40	280	ball bearing	20	40	To the product
VSTH 82/20K	80	70	500	ball bearing	20	70	To the product

To the product finder

VSTH – Swivel castors with plate

Wheels in the VSTH series are available with the LH pressed steel bracket as swivel castors with a plate fitting:

LH series: Pressed steel swivel bracket with top plate fitting, heavy duty design

A detailed description of the bracket series is available in our guide.

	Wheel Ø [mm]	Wheel width [mm]	Load capacity at 4 km/h [kg]	Bearing type	Total height [mm]	Plate dimensions [mm]	Bolt hole spacing [mm]	Bolt hole Ø [mm]	Offset [mm]
LH-VSTH 62K	60	60	320	ball bearing	92	100 x 85	80 x 60	9	45	To the product
LH-VSTH 80K	80	40	280	ball bearing	120	100 x 85	80 x 60	9	45	To the product
LH-VSTH 82K	80	70	500	ball bearing	112	100 x 85	80 x 60	9	45	To the product

To the product finder

VSTH – Fixed castors

Blickle also provides castors with fixed brackets corresponding to the pressed steel swivel castor:

BH series: Pressed steel fixed bracket with top plate fitting, heavy duty design

A detailed description of the bracket series is available in our guide.

	Wheel Ø [mm]	Wheel width [mm]	Load capacity at 4 km/h [kg]	Bearing type	Total height [mm]	Plate dimensions [mm]	Bolt hole spacing [mm]	Bolt hole Ø [mm]
BH-VSTH 80K	80	40	280	ball bearing	120	100 x 85	80 x 60	9	To the product

To the product finder

VSTH – Twin castors

The wheels in the VSTH series can be provided as twin castors in combination with the following bracket types:

LOD series: Heavy duty welded steel swivel bracket with top plate fitting
BOD series: Heavy duty welded steel fixed bracket with top plate fitting
LSD series: Heavy duty welded steel swivel bracket with top plate fitting, heavy duty swivel head
BSD series: Heavy duty welded steel fixed bracket with top plate fitting, heavy duty design

The differences between each bracket series are covered in detail in the guide.

	Wheel Ø [mm]	Wheel width [mm]	Number of wheels	Load capacity at 4 km/h [kg]	Bearing type	Total height [mm]	Plate dimensions [mm]	Bolt hole spacing [mm]	Bolt hole Ø [mm]	Offset [mm]
BOD-VSTH 75K	75	40	2	500	ball bearing	123	140 x 110	105 x 75–80	11		To the product
LOD-VSTH 75K	75	40	2	500	ball bearing	123	140 x 110	105 x 75–80	11	40	To the product
BSD-VSTH 80K	80	40	2	520	ball bearing	125	140 x 110	105 x 75–80	11		To the product
LSD-VSTH 80K	80	40	2	520	ball bearing	125	140 x 110	105 x 75–80	11	40	To the product

To the product finder