GEV – Wheel and castor series

Heavy duty wheels and castors with elastic solid rubber tyres and cast iron wheel centre

The high quality elastic solid rubber tyres in the GEV series are steel-wire reinforced and have a hardness of 65 Shore A. The wheel centre with a grease nipple is made from rugged grey cast iron. In addition to a low level of rolling resistance, the wheels are quiet and provide good floor preservation. The wheels can also be used for higher speeds up to 16 km/h with a reduced load capacity.

The GEV wheel series is also available as a drive wheel (GEVN series)or as a hub fitting wheel (GEVA series) .

GEV – Wheels

The wheels in the GEV series come in sizes ranging between 250 and 620 mm in diameter as standard along with a ball bearing.

	Wheel Ø [mm]	Wheel width [mm]	Load capacity at 4 km/h [kg]	Load capacity at 10 km/h [kg]	Load capacity at 16 km/h [kg]	Bearing type	Axle bore Ø [mm]	Hub length [mm]
GEV 254/30K	250	130	1,270	875	800	ball bearing	30	130	To the product
GEV 280/25K	280	75	870	580	440	ball bearing	25	90	To the product
GEV 302/35K	300	90	1,080	720	540	ball bearing	35	90	To the product
GEV 360/30K	360	60	900	600	450	ball bearing	30	75	To the product
GEV 362/35K	360	75	1,140	760	570	ball bearing	35	90	To the product
GEV 400/30K	400	75	1,200	800	600	ball bearing	30	90	To the product
GEV 405/45K	405	130	1,800	1,200	900	ball bearing	45	130	To the product
GEV 425/45K	425	150	2,160	1,450	1,100	ball bearing	45	150	To the product
GEV 500/35K	500	85	1,560	1,050	780	ball bearing	35	90	To the product
GEV 520/40K	520	100	1,830	1,225	920	ball bearing	40	100	To the product
GEV 550/60K	550	160	2,700	1,800	1,350	ball bearing	60	160	To the product
GEV 610/60K	610	150	2,700	1,800	1,350	ball bearing	60	150	To the product
GEV 620/65K	620	200	4,540	3,105	2,835	ball bearing	65	200	To the product

To the product finder

GEV – Swivel castors with plate

Wheels in the GEV series are available with a welded steel bracket:

LS series: Heavy duty welded steel swivel bracket with top plate fitting, heavy duty swivel head

The brake system versions available for each base product are listed in the relevant section. A detailed description of the bracket series is available in our guide.

	Wheel Ø [mm]	Wheel width [mm]	Load capacity at 4 km/h [kg]	Bearing type	Total height [mm]	Plate dimensions [mm]	Bolt hole spacing [mm]	Bolt hole Ø [mm]	Offset [mm]
LS-GEV 302K	300	90	1,080	ball bearing	355	200 x 160	160 x 120	14	85	To the product
LS-GEV 400K	400	75	1,200	ball bearing	470	200 x 160	160 x 120	14	100	To the product
LS-GEV 520K	520	100	1,830	ball bearing	580	200 x 160	160 x 120	14	125	To the product
LS-GEV 620K	620	200	4,540	ball bearing	710	255 x 200	210 x 160	18	130	To the product

To the product finder

GEV – Fixed castors

Blickle also provides a castor with a fixed bracket to match the welded steel swivel castor:

BS series: Heavy duty welded steel fixed bracket with top plate fitting, heavy duty design

A detailed description of the bracket series is available in our guide.

	Wheel Ø [mm]	Wheel width [mm]	Load capacity at 4 km/h [kg]	Bearing type	Total height [mm]	Plate dimensions [mm]	Bolt hole spacing [mm]	Bolt hole Ø [mm]
BS-GEV 302K	300	90	1,080	ball bearing	355	200 x 160	160 x 120	14	To the product
BS-GEV 400K	400	75	1,200	ball bearing	470	200 x 160	160 x 120	14	To the product
BS-GEV 520K	520	100	1,830	ball bearing	580	200 x 160	160 x 120	14	To the product
BS-GEV 620K	620	200	4,540	ball bearing	710	250 x 270	210 x 160	18	To the product

To the product finder