POES – Wheel and castor series

Wheels and castors with “Blickle SoftMotion” soft rubber tyres and nylon wheel centre

POES wheel and castor series with soft rubber tyres

The grey tread of the POES soft rubber series is non-marking and made from the high quality “Blickle SoftMotion” rubber compound with a hardness of 55 Shore A.It is vulcanised onto the impact-resistant nylon wheel centre, which makes the wheels capable of handling significant lateral loads. The extra-thick tread with a specially tailored contour provides outstanding floor surface preservation and smooth rolling performance, a low level of rolling resistance and a high level of operational comfort.

The POES soft rubber series offers the optimal solution for all applications where excellent damping of the transported goods and significant noise reduction are vitally important. The ALES series can be used for higher speeds.

  • POES – Wheels
    POES wheels

    The POES wheel series is available in sizes ranging between 80 and 200 mm. The wheels have either one or two centrally encapsulated ball bearings, depending on the wheel size. A thread guard protects them against water spray. The wheels in the POES series can be provided with a corrosion-resistant ball bearing.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Axle bore Ø

    [mm]    		 Hub
    length
    [mm]
    POES 80/8KF-SG 80 40 110 ball bearing (C) 8 46 To the product
    POES 80/8XKF-SG 80 40 110 ball bearing (C) 8 46 To the product
    POES 100/8KF-SG 100 40 150 ball bearing (C) 8 46 To the product
    POES 100/8XKF-SG 100 40 150 ball bearing (C) 8 46 To the product
    POES 125/8KA-SG 125 40 175 ball bearing (C) 8 46 To the product
    POES 125/8XKA-SG 125 40 175 ball bearing (C) 8 46 To the product
    POES 150/12KA-SG 150 50 280 ball bearing (CC) 12 62 To the product
    POES 150/12XKA-SG 150 50 280 ball bearing (CC) 12 62 To the product
    POES 160/12KA-SG 160 50 300 ball bearing (CC) 12 62 To the product
    POES 160/12XKA-SG 160 50 300 ball bearing (CC) 12 62 To the product
    POES 200/12KA-SG 200 50 350 ball bearing (CC) 12 62 To the product
    POES 200/12XKA-SG 200 50 350 ball bearing (CC) 12 62 To the product
    To the product finder
  • POES – Swivel castors with plate
    POES swivel castors with plate

    The POES wheel series is available with a variety of bracket series with a plate fitting. In terms of load bearing capacity, these range from a single pressed steel swivel castor through to heavy duty pressed steel swivel castors.

    LE series: Pressed steel swivel bracket with top plate fitting
    LK series: Pressed steel swivel bracket with top plate fitting, heavy duty design

    A comparison of the bracket series is available in our guide. Suitable brake system versions for each base product are provided in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LK-POES 80KF-SG 80 40 110 ball bearing (C) 110 100 x 85 80 x 60 9 40 To the product
    LE-POES 100KF-SG 100 40 150 ball bearing (C) 125 100 x 85 80 x 60 9 36 To the product
    LE-POES 125KA-SG 125 40 150 ball bearing (C) 150 100 x 85 80 x 60 9 38 To the product
    LE-POES 150KA-SG 150 50 280 ball bearing (CC) 190 140 x 110 105 x 75–80 11 54 To the product
    LE-POES 160KA-SG 160 50 300 ball bearing (CC) 195 140 x 110 105 x 75–80 11 54 To the product
    LE-POES 200KA-SG 200 50 300 ball bearing (CC) 235 140 x 110 105 x 75–80 11 54 To the product
    To the product finder
  • POES – Swivel castors with bolt hole
    POES swivel castors with bolt hole

    As an alternative to a plate fitting, the POES series is also available with a bolt hole fitting:

    LER series: Pressed steel swivel bracket with bolt hole
    LKR series: Pressed steel swivel bracket with bolt hole, heavy duty design

    A comparison of the various brackets and their features is available in the guide. The brake systems available for each base product are listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate Ø

    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LKR-POES 80KF-SG 80 40 110 ball bearing (C) 110 88 13 40 To the product
    LER-POES 100KF-SG 100 40 150 ball bearing (C) 125 70 13 36 To the product
    LER-POES 125KA-SG 125 40 150 ball bearing (C) 150 70 13 38 To the product
    To the product finder
  • POES – Fixed castors
    POES fixed castors

    Blickle also provides suitable castors with fixed brackets for all of the swivel castor series.

    B series: Pressed steel fixed bracket with top plate fitting, medium duty design
    BK series: Pressed steel fixed bracket with top plate fitting, heavy duty design

    The properties of each individual fixed castor series are listed in the guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]
    BK-POES 80KF-SG 80 40 110 ball bearing (C) 110 100 x 85 80 x 60 9 To the product
    B-POES 100KF-SG 100 40 150 ball bearing (C) 125 100 x 85 80 x 60 9 To the product
    B-POES 125KA-SG 125 40 175 ball bearing (C) 150 100 x 85 80 x 60 9 To the product
    B-POES 150KA-SG 150 50 280 ball bearing (CC) 190 140 x 110 105 x 75–80 11 To the product
    B-POES 160KA-SG 160 50 300 ball bearing (CC) 195 140 x 110 105 x 75–80 11 To the product
    B-POES 200KA-SG 200 50 350 ball bearing (CC) 235 140 x 110 105 x 75–80 11 To the product
    To the product finder