TPA – Wheel and castor series

Wheels and castors with thermoplastic rubber tread and polypropylene wheel centre

TPA wheel and castor series

Wheels and castors in the TPA series have a tread of high-quality thermoplastic rubber-elastomer (TPE) and an impact-resistant polypropylene wheel centre. The grey tread with a hardness of 85 Shore A is chemically bonded to the wheel centre. The wheels are non-marking and characterised by low rolling and swivel resistance.

The oil in the tread may cause some discolouration on sensitive surfaces. In such cases, the VPP, POES, POEV oder PATH series can be used as an alternative.

  • TPA – Wheels
    TPA wheels

    The wheels in the TPA series come in sizes ranging between 80 and 200 mm in diameter. Customers can choose between a ball bearing, roller bearing or central encapsulated ball bearing. Electrically conductive wheels and wheels with additional ball bearing seals are also available.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Axle bore Ø

    [mm]    		 Hub
    length
    [mm]
    TPA 80/12G 80 32 100 plain bore 12 35 To the product
    TPA 80/8KF 80 32 100 ball bearing (C) 8 36 To the product
    TPA 102/12G 100 32 110 plain bore 12 45 To the product
    TPA 102/8KF 100 32 110 ball bearing (C) 8 46 To the product
    TPA 127/12G 125 32 125 plain bore 12 45 To the product
    TPA 127/8KF 125 32 125 ball bearing (C) 8 46 To the product
    TPA 160/20G 160 40 200 plain bore 20 60 To the product
    TPA 160/20R 160 40 200 roller bearing 20 60 To the product
    TPA 160/20XR 160 40 200 roller bearing 20 60 To the product
    TPA 200/20G 200 40 250 plain bore 20 60 To the product
    TPA 200/20R 200 40 250 roller bearing 20 60 To the product
    TPA 200/20XR 200 40 250 roller bearing 20 60 To the product
    To the product finder
  • TPA – Swivel castors with plate
    TPA swivel castors with plate

    The TPA wheel series is available for the following bracket with top plate fitting:

    LE series: Pressed steel swivel bracket with top plate fitting

    A detailed description of the bracket series and the different brake systems is available in our guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LE-TPA 80G 80 32 100 plain bore 102 100 x 85 80 x 60 9 38 To the product
    LE-TPA 80KF 80 32 100 ball bearing (C) 102 100 x 85 80 x 60 9 38 To the product
    LE-TPA 102G 100 32 110 plain bore 125 100 x 85 80 x 60 9 36 To the product
    LE-TPA 102KF 100 32 110 ball bearing (C) 125 100 x 85 80 x 60 9 36 To the product
    LE-TPA 127G 125 32 125 plain bore 150 100 x 85 80 x 60 9 38 To the product
    LE-TPA 127KF 125 32 125 ball bearing (C) 150 100 x 85 80 x 60 9 38 To the product
    LE-TPA 160G 160 40 200 plain bore 195 140 x 110 105 x 75–80 11 54 To the product
    LE-TPA 160R 160 40 200 roller bearing 195 140 x 110 105 x 75–80 11 54 To the product
    LE-TPA 200G 200 40 250 plain bore 235 140 x 110 105 x 75–80 11 54 To the product
    LE-TPA 200R 200 40 250 roller bearing 235 140 x 110 105 x 75–80 11 54 To the product
    To the product finder
  • TPA – Swivel castors with bolt hole
    TPA swivel castors with bolt hole

    As an alternative to a plate fitting, the TPA series is also available with a bolt hole fitting:

    LER series: Pressed steel swivel bracket with bolt hole

    A detailed description of the bracket’s features is available in our guide. The brake systems available for each base product are listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate Ø

    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LER-TPA 80G 80 32 100 plain bore 102 70 13 38 To the product
    LER-TPA 80KF 80 32 100 ball bearing (C) 102 70 13 38 To the product
    LER-TPA 102G 100 32 110 plain bore 125 70 13 36 To the product
    LER-TPA 102KF 100 32 110 ball bearing (C) 125 70 13 36 To the product
    LER-TPA 127G 125 32 125 plain bore 150 70 13 38 To the product
    LER-TPA 127KF 125 32 125 ball bearing (C) 150 70 13 38 To the product
    LER-TPA 160G 160 40 200 plain bore 195 88 13 54 To the product
    LER-TPA 160R 160 40 200 roller bearing 195 88 13 54 To the product
    LER-TPA 200G 200 40 250 plain bore 235 88 13 54 To the product
    LER-TPA 200R 200 40 250 roller bearing 235 88 13 54 To the product
    To the product finder
  • TPA – Fixed castors
    TPA fixed castors

    Blickle also provides a suitable fixed castor series in addition to the swivel castors:

    B series: B series: Pressed steel fixed bracket with top plate fitting, medium duty design

    A detailed description of this bracket series is available in our guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]
    B-TPA 80G 80 32 100 plain bore 102 100 x 85 80 x 60 9 To the product
    B-TPA 80KF 80 32 100 ball bearing (C) 102 100 x 85 80 x 60 9 To the product
    B-TPA 102G 100 32 110 plain bore 125 100 x 85 80 x 60 9 To the product
    B-TPA 102KF 100 32 110 ball bearing (C) 125 100 x 85 80 x 60 9 To the product
    B-TPA 127G 125 32 125 plain bore 150 100 x 85 80 x 60 9 To the product
    B-TPA 127KF 125 32 125 ball bearing (C) 150 100 x 85 80 x 60 9 To the product
    B-TPA 160G 160 40 200 plain bore 195 140 x 110 105 x 75–80 11 To the product
    B-TPA 160R 160 40 200 roller bearing 195 140 x 110 105 x 75–80 11 To the product
    B-TPA 200G 200 40 250 plain bore 235 140 x 110 105 x 75–80 11 To the product
    B-TPA 200R 200 40 250 roller bearing 235 140 x 110 105 x 75–80 11 To the product
    To the product finder