V – Wheel and castor series
Wheels and castors with standard solid rubber tyres and pressed steel rim, reinforced version
The standard solid rubber tyre of the V series is pressed or bolted together with a stamped pressed steel rim and the bearing. The tyres have a hardness of 80 Shore A and provide a high level of operational comfort, good floor preservation and low-noise operation. In contrast to the VE wheel series, the V series is suitable for higher loads.
The V series is frequently used for manually operated transport units, as support wheels for trailers and in a wide range of small units.
-
V – Wheels
Wheels in the V series have diameters ranging between 80 and 400 mm with a roller bearing, ball bearing or plain bore. The wheels are also available with a non-marking grey tyre or with an electrically conductive design.
Wheel Ø
[mm]Wheel
width
[mm]Load capacity
at 4 km/h
[kg]Bearing type
Axle bore Ø
[mm]Hub
length
[mm]V 80/12R 80 25 50 roller bearing 12 35 To the product V 100/15R 100 30 70 roller bearing 15 45 To the product V 125/15R 125 37.5 100 roller bearing 15 45 To the product V 140/15R 140 37.5 115 roller bearing 15 45 To the product V 162/20G 160 40 135 plain bore 20 60 To the product V 162/20R 160 40 135 roller bearing 20 60 To the product V 182/20G 180 50 170 plain bore 20 60 To the product V 182/20R 180 50 170 roller bearing 20 60 To the product V 184/20-50K 180 80 300 ball bearing 20 50 To the product V 202/20G 200 50 205 plain bore 20 60 To the product V 202/20R 200 50 205 roller bearing 20 60 To the product V 202/25R 200 50 205 roller bearing 25 60 To the product V 200/20K 200 50 205 ball bearing 20 60 To the product V 205/20R 200 65 225 roller bearing 20 60 To the product V 252/20G 250 60 295 plain bore 20 65 To the product V 252/25G 250 60 295 plain bore 25 65 To the product V 252/25R 250 60 295 roller bearing 25 65 To the product V 250/25K 250 60 295 ball bearing 25 65 To the product V 254/25-65R 250 75 320 roller bearing 25 65 To the product V 256/20-75K 250 85 350 ball bearing 20 75 To the product V 256/25-75K 250 85 350 ball bearing 25 75 To the product V 265/25-75G 265 64 800 plain bore 25 75 To the product V 282/25R 280 70 385 roller bearing 25 75 To the product V 302/30-55G 300 60 700 plain bore 30 55 To the product V 302/25-50R 300 60 300 roller bearing 25 50 To the product V 302/25-75R 300 60 300 roller bearing 25 75 To the product V 350/25-80R 350 70 300 roller bearing 25 80 To the product V 350/25-75K 350 70 300 ball bearing 25 75 To the product V 400/25-90G 400 75 300 plain bore 25 90 To the product V 400/25-75R 400 75 300 roller bearing 25 75 To the product V 400/25-90R 400 75 300 roller bearing 25 90 To the product V 400/30-90R 400 75 300 roller bearing 30 90 To the product V 402/25-90R 400 80 475 roller bearing 25 90 To the product V 402/30-90K 400 80 475 ball bearing 30 90 To the product -
V – Swivel castors with plate
As standard, the wheels in the V series are available for the following bracket series with top plate fitting:
L series: Pressed steel swivel bracket with top plate fitting, medium duty design
A detailed description of the L bracket is available in our guide.
Wheel Ø
[mm]Wheel
width
[mm]Load capacity
at 4 km/h
[kg]Bearing type
Total height
[mm]Plate
dimensions
[mm]Bolt hole
spacing
[mm]Bolt
hole Ø
[mm]Offset
[mm]L-V 80R 80 25 50 roller bearing 102 100 x 85 80 x 60 9 38 To the product L-V 100R 100 30 70 roller bearing 125 100 x 85 80 x 60 9 36 To the product L-V 125R 125 37.5 100 roller bearing 150 100 x 85 80 x 60 9 38 To the product L-V 140R 140 37.5 115 roller bearing 170 140 x 110 105 x 75–80 11 50 To the product L-V 162R 160 40 135 roller bearing 195 140 x 110 105 x 75–80 11 60 To the product L-V 182R 180 50 170 roller bearing 215 140 x 110 105 x 75–80 11 60 To the product L-V 202R 200 50 205 roller bearing 235 140 x 110 105 x 75–80 11 65 To the product L-V 200K 200 50 205 ball bearing 235 140 x 110 105 x 75–80 11 65 To the product L-V 205R 200 65 225 roller bearing 240 140 x 110 105 x 75–80 11 70 To the product L-V 252R 250 60 295 roller bearing 295 175 x 175 140 x 140 15 70 To the product L-V 252R-3 250 60 295 roller bearing 295 140 x 110 105 x 75–80 11 77 To the product L-V 256K 250 85 350 ball bearing 295 175 x 175 140 x 140 15 70 To the product L-V 282R 280 70 385 roller bearing 318 175 x 175 140 x 140 15 78 To the product -
V – Fixed castors
The V wheel series can be combined with the following fixed castor brackets:
B series: Pressed steel fixed bracket with top plate fitting, medium duty design
BH series: Pressed steel fixed bracket with top plate fitting, heavy duty designA comparison of the two fixed bracket series is available in the guide.
Wheel Ø
[mm]Wheel
width
[mm]Load capacity
at 4 km/h
[kg]Bearing type
Total height
[mm]Plate
dimensions
[mm]Bolt hole
spacing
[mm]Bolt
hole Ø
[mm]B-V 80R 80 25 50 roller bearing 102 100 x 85 80 x 60 9 To the product B-V 100R 100 30 70 roller bearing 125 100 x 85 80 x 60 9 To the product B-V 125R 125 37.5 100 roller bearing 150 100 x 85 80 x 60 9 To the product B-V 140R 140 37.5 115 roller bearing 170 140 x 110 105 x 75–80 11 To the product B-V 162R 160 40 135 roller bearing 195 140 x 110 105 x 75–80 11 To the product B-V 182R 180 50 170 roller bearing 215 140 x 110 105 x 75–80 11 To the product B-V 202R 200 50 205 roller bearing 235 140 x 110 105 x 75–80 11 To the product B-V 200K 200 50 205 ball bearing 235 140 x 110 105 x 75–80 11 To the product B-V 205R 200 65 225 roller bearing 240 140 x 110 105 x 75–80 11 To the product BH-V 252R 250 60 295 roller bearing 295 140 x 110 105 x 75–80 11 To the product B-V 252R 250 60 295 roller bearing 295 220 x 130 190 x 75 15 To the product B-V 256K 250 85 350 ball bearing 295 220 x 130 190 x 75 15 To the product B-V 282R 280 70 385 roller bearing 318 220 x 130 190 x 75 15 To the product