Bracket types

Swivel and Fixed castors bracket types

This page provides a comprehensive overview of all of the swivel bracket series in the Blickle range. Use this page to compare designs and materials, compatible brake systems and the different versions and options available for each bracket series.

  • Pressed steel swivel bracket for light-duty castors
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LRA-LKRA
    LPA-LKPA
    LMDA
    LDA
    Series
    For wheel Ø
    Load capacity
    Bracket structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Directional lock
    Options
    Matching fixed bracket series
    Additional considerations
    LRA / LKRA – light-duty swivel bracket with bolt hole
    35–150 mm
    up to 150 kg
    pressed steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    synthetic “stop-fix” brake lever for series LRA, steel brake lever for series LKRA
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    bolt hole
    BRA, BKRA
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LPA / LKPA – light-duty swivel bracket with top plate
    35–150 mm
    up to 150 kg
    pressed steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    synthetic “stop-fix” brake lever for series LPA, steel brake lever for series LKPA
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    top plate
    BPA, BKPA
    LMDA – light-duty twin wheel swivel bracket with bolt hole
    50–75 mm
    up to 100 kg
    pressed steel, double ball bearing in the swivel head, pressed swivel head
    synthetic brake lever
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    bolt hole
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LDA – light-duty twin wheel swivel bracket with top plate
    50–75 mm
    up to 100 kg
    pressed steel, double ball bearing in the swivel head, strong central kingpin, pressed swivel head
    synthetic brake lever
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    top plate
    –
  • Synthetic swivel bracket
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LKFG_bolt-hole
    LKFG_top-plate
    LKFGX_bolt-hole
    LKFGX_top-plate
    LWK-LWG_bolt-hole
    LWK-LWG_top-plate
    LWK-LWG_stem
    LWKX-LWGX Bolt hole
    LWKX-LWGX Top-plate
    LKDG-LKDB
    LKD-LKDG_bolt-hole
    LKD-LKDG_stem
    LKDX-LKDGX_bolt-hole
    LKDX-LKDGX Stem
    Series
    For wheel Ø
    Load capacity
    Bracket structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Directional lock
    Options
    Matching fixed bracket series
    Additional considerations
    LKFG – Synthetic swivel bracket with bolt hole, design castor FLOW
    125 mm
    up to 110 kg
    high-quality thermoplastic, double ball bearing in the swivel head, modern, appealing design
    silver grey RAL 7001
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °C to +50 °C temporarily up to +100 °C
    bolt hole
    • soft tread 60 Shore A, wheel variant (-TPS)
    • with zinc-plated top plate fitting (-P25)
    • with zinc-plated plug-in stem (-ZA51)
    • special colour
    BKFG
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LKFG – Synthetic swivel bracket with top plate, design castor FLOW
    125 mm
    up to 110 kg
    high-quality thermoplastic, double ball bearing in the swivel head, modern, appealing design
    silver grey RAL 7001 zinc-plated steel top plate
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °C to +50 °C temporarily up to +100 °C
    top plate
    • soft tread 60 Shore A, wheel variant (-TPS)
    • special colour
    BKFG
    LKFGX – Synthetic swivel bracket with bolt hole, design castor FLOW
    125 mm
    up to 110 kg
    high-quality thermoplastic, double corrosion-resistant ball bearing in the swivel head, all parts including axle material are corrosion-resistant, modern, appealing design
    silver grey RAL 7001
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °C to +50 °C temporarily up to +100 °C
    bolt hole
    • soft tread 60 Shore A, wheel variant (-TPS)
    • with top plate fitting stainless steel version in accordance with GKN standard (-PX27)
    • stainless steel plug-in stem fitting (-ZAX51)
    • special colour
    BKFGX
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LKFGX – Synthetic swivel bracket with top plate, design castor FLOW
    125 mm
    up to 110 kg
    high-quality thermoplastic, double corrosion-resistant ball bearing in the swivel head, all parts including axle material are corrosion-resistant, modern, appealing design
    silver grey RAL 7001 vibration-ground finished stainless steel top plate
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °C to +50 °C temporarily up to +100 °C
    top plate
    • soft tread 60 Shore A, wheel variant (-TPS)
    • special colour
    BKFGX
    LWK / LWG – synthetic swivel bracket with bolt hole, design castor WAVE
    100–125 mm
    up to 110 kg
    high-quality nylon 6, impact resistant, encapsulated, double-sealed, grooved ball bearing in the swivel head, modern, appealing design
    LWK: grey white RAL 9002 LWG: silver grey RAL 7001
    encapsulated, double-sealed, grooved ball bearing
    maintenance-free, long-life grease
    -20 °C to +70 °C temporarily up to +80 °C
    bolt hole
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LWK / LWG – synthetic swivel bracket with top plate, design castor WAVE
    100–125 mm
    up to 110 kg
    high-quality nylon 6, impact resistant, encapsulated, double-sealed, grooved ball bearing in the swivel head, modern, appealing design
    LWK: grey white RAL 9002 LWG: silver grey RAL 7001 zinc-plated steel top plate
    encapsulated, double-sealed, grooved ball bearing
    maintenance-free, long-life grease
    -20 °C to +70 °C temporarily up to +80 °C
    top plate
    • electrically conductive, non-marking (-ELS)
    • plate size 78x66 mm (-P28)
    • special colour
    –
    LWK / LWG – synthetic swivel bracket with stem, design castor WAVE
    100–125 mm
    up to 110 kg
    high-quality nylon 6, impact resistant, encapsulated, double-sealed, grooved ball bearing in the swivel head, with steel plug-in stem, bolted and secured, modern, appealing design
    LWK: grey white RAL 9002 LWG: silver grey RAL 7001 zinc-plated steel stem
    encapsulated, double-sealed, grooved ball bearing
    maintenance-free, long-life grease
    -20 °C to +70 °C temporarily up to +80 °C
    stem
    • electrically conductive, non-marking (-ELS)
    • special colour
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LWKX / LWGX – synthetic swivel bracket with bolt hole, design castor WAVE
    100–125 mm
    up to 110 kg
    high-quality nylon 6, impact resistant, encapsulated, double-sealed, grooved ball bearing in the swivel head, all parts including axle material are corrosion-resistant, modern, appealing design
    LWKX: grey white RAL 9002 LWGX: silver grey RAL 7001
    corrosion-resistant, encapsulated, double-sealed, grooved ball bearing
    maintenance-free, long-life grease
    -20 °C to +70 °C temporarily up to +80 °C
    bolt hole
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LWKX / LWGX – synthetic swivel bracket with top plate, design castor WAVE
    100–125 mm
    up to 110 kg
    high-quality nylon 6, impact resistant, encapsulated, double-sealed, grooved ball bearing in the swivel head, all parts including axle material are corrosion-resistant, modern, appealing design
    LWKX: grey white RAL 9002 LWGX: silver grey RAL 7001 vibration-ground finished stainless steel top plate
    corrosion-resistant, encapsulated, double-sealed, grooved ball bearing
    maintenance-free, long-life grease
    -20 °C to +70 °C temporarily up to +80 °C
    top plate
    • electrically conductive, non-marking (-ELS)
    • plate size 90x66 mm (-PX26)
    • special colour
    –
    LWKX / LWGX – synthetic swivel bracket with stem, design castor WAVE
    100–125 mm
    up to 110 kg
    high-quality nylon 6, impact resistant, encapsulated, double-sealed, grooved ball bearing in the swivel head, stainless steel plug-in stem, bolted and secured, all parts including axle material are corrosion-resistant, modern, appealing design
    LWKX: grey white RAL 9002 LWGX: silver grey RAL 7001 vibration-ground fi nished stainless steel stem
    corrosion-resistant, encapsulated, double-sealed, grooved ball bearing
    maintenance-free, long-life grease
    -20 °C to +70 °C temporarily up to +80 °C
    stem
    • electrically conductive, non-marking (-ELS)
    • special colour
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LKDG / LKDB – synthetic twin wheel swivel bracket for furniture castors
    50–100 mm
    up to 110 kg
    high-quality nylon 6, impact resistant, high-quality synthetic plain bore in the swivel head
    LKDG: light grey RAL 7035 LKDB: black RAL 9005 zinc-plated steel threaded pin
    maintenance-free, long-life grease
    -30 °C to +70 °C temporarily up to +80 °C
    threaded pin
    • electrically conductive, non-marking (-ELS)
    • stainless steel version
    • zinc-plated steel top plate fitting (-P...)
    • zinc-plated steel plug-in pin (-ES)
    • special colour
    –
    LKD / LKDG – synthetic twin wheel swivel bracket with bolt hole, design castor MOVE
    100–125 mm
    up to 125 kg
    high-quality nylon 6, impact resistant, two grooved ball bearings in the swivel head sealed on both sides, modern, appealing design
    LKD: grey white RAL 9002 LKDG: silver grey RAL 7001
    two grooved ball bearings sealed on both sides
    maintenance-free, long-life grease
    -20 °C to +70 °C temporarily up to +80 °C
    bolt hole
    • electrically conductive, non-marking (-ELS)
    • threaded pin (-GS10 / -GS12)
    • directional lock combined with wheel brake (1 x 360°) (-RIFI)
    • special mounting height 135 mm (LKDH / LKDGH)
    • top plate fitting (-P25/-P26)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LKD / LKDG – synthetic twin wheel swivel bracket with stem, design castor MOVE
    100–125 mm
    up to 125 kg
    high-quality nylon 6, impact resistant, two grooved ball bearings in the swivel head sealed on both sides, with steel plug-in stem, bolted and secured, modern, appealing design
    LKD: grey white RAL 9002 LKDG: silver grey RAL 7001 zinc-plated steel stem
    two grooved ball bearings sealed on both sides
    maintenance-free, long-life grease
    -20 °C to +70 °C temporarily up to +80 °C
    stem
    • electrically conductive, non-marking (-ELS)
    • directional lock combined with wheel brake (1 x 360°) (-RIFI)
    • special mounting height 135 mm (LKDH / LKDGH)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LKDX / LKDGX – synthetic twin wheel swivel bracket, corrosion resistant, with bolt hole, designer castor MOVE
    100–125 mm
    up to 125 kg
    high-quality nylon 6, impact resistant, two corrosion-resistant grooved ball bearings in swivel head sealed on both sides, all parts including axle material are corrosion-resistant, modern, appealing design
    LKDX: grey white RAL 9002 LKDGX: silver grey RAL 7001
    two corrosion-resistant grooved ball bearings sealed on both sides
    maintenance-free, long-life grease
    -20 °C to +70 °C temporarily up to +80 °C
    bolt hole
    • electrically conductive, non-marking (-ELS)
    • threaded pin (-GSX10 / -GSX12)
    • directional lock combined with wheel brake (1 x 360°) (-RIFI)
    • special mounting height 135 mm (LKDXH / LKDGXH)
    • top plate fitting (-PX25/-PX26)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LKDX / LKDGX – synthetic twin wheel swivel bracket, corrosion resistant, with stem fitting, designer castor MOVE
    100–125 mm
    up to 125 kg
    high-quality nylon 6, impact resistant, two corrosion-resistant grooved ball bearings in swivel head sealed on both sides, with stainless steel plug-in stem, bolted and secured, all parts including axle material are corrosion-resistant, modern, appealing design
    LKDX: grey white RAL 9002 LKDGX: silver grey RAL 7001 vibration-ground fi nished stainless steel stem
    two corrosion-resistant grooved ball bearings sealed on both sides
    maintenance-free, long-life grease
    -20 °C to +70 °C temporarily up to +80 °C
    stem
    • electrically conductive, non-marking (-ELS)
    • directional lock combined with wheel brake (1 x 360°) (-RIFI)
    • special mounting height 135 mm (LKDXH / LKDGXH)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
  • Pressed steel swivel bracket for transport equipment castors
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LE
    LER
    LEZ
    L
    LR
    LK
    LKR
    Series
    For wheel Ø
    Load capacity
    Bracket structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Directional lock
    Options
    Matching fixed bracket series
    Additional considerations
    LE – pressed steel swivel bracket with top plate
    60–200 mm
    up to 300 kg
    pressed steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -30 °C to +70 °C
    top plate
    • steel foot guard (-FS)
    B
    LER – pressed steel swivel bracket with bolt hole
    60–200 mm
    up to 300 kg
    pressed steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    bolt hole
    • steel foot guard (-FS)
    • truck lock (FF...)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LEZ – pressed steel swivel bracket with stem
    75–200 mm
    up to 300 kg
    pressed steel, double ball bearing in the swivel head, steel plug-in stem and central kingpin bolted and secured, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    stem
    • steel foot guard (-FS)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    L – pressed steel swivel bracket, medium- duty version, with top plate
    60–280 mm
    up to 600 kg
    pressed steel, double ball bearing in the swivel head, strong central kingpin (from wheel Ø 150 mm), minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer (exception: plate size 175x175 mm)
    maintenance-free, long-life grease
    -30 °C to +70 °C
    top plate
    • steel foot guard (-FS)
    B, BH
    LR – pressed steel swivel bracket, medium- duty version, with bolt hole
    60–125 mm
    up to 250 kg
    pressed steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    bolt hole
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LK – pressed steel swivel bracket, heavy- duty version, with top plate
    65–200 mm
    up to 600 kg
    strong pressed steel, double ball bearing in the swivel head, strong central kingpin (from wheel Ø 125x50 mm), minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -30 °C to +70 °C
    top plate
    • steel foot guard (-FS)
    • truck lock (FF...)
    BK, BH
    LKR – pressed steel swivel bracket, heavy- duty version, with bolt hole
    65–125 mm
    up to 350 kg
    strong pressed steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    bolt hole
    • steel foot guard (-FS)
    • truck lock (FF...)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
  • Pressed steel swivel bracket for heavy-duty castors
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LH
    LHZ
    LHD
    LUH
    LO
    LOD
    LS
    LSD
    LSSD
    Series
    For wheel Ø
    Load capacity
    Bracket structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Directional lock
    Options
    Matching fixed bracket series
    Additional considerations
    LH – pressed steel swivel bracket, heavy- duty version, with top plate
    60–250 mm
    up to 900 kg
    strong pressed steel, heavy fork and top plate, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially- shaped, hardened bearing seats, bolted and secured central kingpin, extremely strong, minimum wear at high load
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    top plate
    • steel foot guard (-FS)
    • spring-loaded foot guard (-FG)
    • truck lock (FF...)
    BH
    LHZ - pressed steel swivel bracket, heavy- duty design, with stem
    125–200 mm
    up to 800 kg
    strong pressed steel, heavy fork and top plate, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially- shaped, hardened bearing seats, very strong, welded steel plug-in stem, bolted and secured, minimum wear at high load
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    stem
    • steel foot guard (-FS)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LHD – pressed steel twin wheel swivel bracket, heavy-duty design, with top plate
    60–125 mm
    up to 500 kg
    strong pressed steel, heavy fork and top plate, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially- shaped, hardened bearing seats, bolted and secured central kingpin, extremely strong, minimum wear at high load
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    top plate
    BOD
    • the long plate side is parallel to the wheel axle for fixed castors
    LUH – pressed steel swivel bracket, heavy-duty design, enclosed, with top plate
    125–200 mm
    up to 1,000 kg
    strong pressed steel, four-point ball bearing for extremely heavy loads, particularly resistant to shocks and impact due to specially-shaped, hardened bearing seats, smooth rolling characteristic and low wear, increased service life
    zinc-plated, blue-passivated, Cr6-free
    enclosed and sealed swivel head
    maintenance-free, long-life grease
    -30 °C to +100 °C
    top plate
    • steel foot guard (-FS)
    • truck lock (FF...)
    BH
    LO – heavy-duty welded steel swivel bracket
    125–250 mm
    up to 1,200 kg
    solid welded steel construction, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially-shaped, hardened bearing seats, grease nipple, bolted and secured welded central kingpin, extremely strong
    zinc-plated, blue-passivated, Cr6-free
    ball protection due to labyrinth design
    maintenance-free, long-life grease
    -30 °C to +130 °C
    • plate size 175x140 mm (-35)
    • steel foot guard (-FS)
    • truck lock (FF...)
    BO
    LOD – heavy-duty welded steel twin wheel swivel bracket
    75–125 mm
    up to 1,200 kg
    solid welded steel construction, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially-shaped, hardened bearing seats, grease nipple, bolted and secured welded central kingpin, extremely strong
    zinc-plated, blue-passivated, Cr6-free
    ball protection due to labyrinth design
    maintenance-free, long-life grease
    -30 °C to +130 °C
    top plate
    BOD
    • the long plate side is parallel to the wheel axle for fixed castors
    LS – heavy-duty welded steel swivel bracket, heavy-duty swivel head
    100–620 mm
    up to 12,000 kg
    particularly robust welded steel construction, axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head, grease nipple, bolted and secured welded central kingpin, extremely strong
    zinc-plated, yellow-passivated, Cr6-free
    ball protection due to sealing ring and labyrinth design
    maintenance-free, long-life grease
    -30 °C to +100 °C
    top plate
    • steel foot guard (-FS)
    • spring-loaded foot guard (-FG)
    • truck lock (FF...)
    BS
    LSD – heavy-duty welded steel twin wheel swivel bracket, heavy-duty swivel head
    80–500 mm
    up to 20,000 kg
    particularly robust welded steel construction, axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head, grease nipple, bolted and secured welded central kingpin, extremely strong
    zinc-plated, yellow-passivated, Cr6-free
    ball protection due to sealing ring and labyrinth design
    maintenance-free, long-life grease
    -30 °C to +100 °C
    top plate
    • steel foot guard (-FS)
    BSD
    • the long plate side is parallel to the wheel axle for fixed castors
    LSSD – heavy-duty welded steel twin wheel swivel bracket, extra heavy-duty swivel head
    500 mm
    30,000 kg
    particularly robust welded steel construction, four-point swivel bearing for extremely heavy loads, grease nipple
    zinc-plated, yellow-passivated, Cr6-free
    integrated sealing ring for ball protection
    according to Blickle maintenance instructions
    -30 °C to +100 °C
    top plate
    BSSD
  • Spring-loaded heavy-duty swivel bracket
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LHF
    LPFE
    LSFN
    LSFE
    Series
    For wheel Ø
    Load capacity
    Bracket structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Directional lock
    Options
    Matching fixed bracket series
    Additional considerations
    LHF – pressed steel swivel bracket, heavy- duty design, with steel spring
    100–200 mm
    up to 800 kg
    strong pressed steel, heavy fork and top plate, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially- shaped, hardened bearing seats, bolted and secured central kingpin, extremely strong, minimum wear at high load, robust spring structure with steel spring
    Further information is available here.
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    top plate
    BHF
    LPFE – heavy-duty swivel bracket with polyurethane torsion springs
    100–150 mm
    up to 500 kg
    solid welded steel construction, solid forged part, one sealed lifetime lubricated grooved ball bearing in the swivel head (two for wheel Ø 125x50 mm or more), patented woodruff key design for outstanding spring-damping properties
    You can find more information here.
    zinc-plated, yellow-passivated, Cr6-free
    two sealed grooved ball bearings
    maintenance-free, long-life grease
    -20 °C to +80 °C
    top plate
    • stem fitting (-ZA)
    BPFE
    LSFN – heavy-duty welded steel swivel bracket with steel spring
    160–300 mm
    up to 2,400 kg
    particularly robust welded steel construction, axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head, grease nipple, bolted and secured welded central kingpin, extremely strong, minimum wear at high load, robust spring structure with steel spring
    For more information, watch this video.
    zinc-plated, yellow-passivated, Cr6-free
    ball protection due to sealing ring and labyrinth design
    maintenance-free, long-life grease
    -30 °C to +100 °C
    top plate
    • different spring tensions
    BSFN
    LSFE – heavy-duty welded steel swivel bracket with polyurethane spring
    160–250 mm
    up to 1,800 kg
    particularly robust welded steel construction, axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head, grease nipple, bolted and secured welded central kingpin, extremely strong, elastomer spring for excellent damping properties
    zinc-plated, yellow-passivated, Cr6-free
    ball protection due to sealing ring and labyrinth design
    maintenance-free, long-life grease
    -20 °C to +80 °C
    top plate
    • different spring tensions
    BSFE
    • spring characteristics can be adjusted by swapping out the elastomer hinged plate construction
  • Stainless steel swivel bracket for light-duty castors
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LRXA-LKRXA
    LPXA-LKPXA
    LEX
    LEXR
    LEXZ
    LX
    Series
    For wheel Ø
    Load capacity
    Bracket structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Directional lock
    Options
    Matching fixed bracket series
    Additional considerations
    LRXA / LKRXA – stainless steel light-duty swivel bracket with bolt hole
    50–125 mm
    up to 120 kg
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground fi nishing
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    bolt hole
    • expander fitting for round and square tubes (see page 398)
    • stainless steel plug-in stem fi tting (-ZAX51)
    • buffer (see page 398)
    BRXA, BKRXA
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LPXA / LKPXA – stainless steel light-duty swivel bracket with top plate
    50–125 mm
    up to 120 kg
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    top plate
    BPXA, BKPXA
    LEX – stainless steel swivel bracket with top plate
    75–200 mm
    up to 300 kg
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -30 °C to +70 °C
    top plate
    • automatic direction reset device (-RIR2)
    • washing machine resistant castor (DIN 18867-8) (-GKN)
    • synthetic foot guard (-FP)
    BX
    LEXR – stainless steel swivel bracket with bolt hole
    75–200 mm
    up to 300 kg
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    bolt hole
    • synthetic foot guard (-FP)
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LEXZ – Stainless steel swivel bracket with stem
    75–200 mm
    up to 300 kg
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, stainless steel plug-in stem and central kingpin bolted and secured, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +130 °C
    stem
    • synthetic foot guard (-FP)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LX – stainless steel swivel bracket, medium- duty version, with top plate
    100–200 mm
    up to 400 kg
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -30 °C to +70 °C
    top plate
    • synthetic foot guard (-FP)
    BX
    LKX – stainless steel swivel bracket, heavy- duty design, with top plate
    75–200 mm
    up to 800 kg
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin (from wheel Ø 125x50 mm), minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -30 °C to +70 °C
    top plate
    • automatic direction reset device (-RIR2)
    BKX
  • Heat-resistant pressed steel swivel bracket
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LI
    LIR
    LIK
    LIO
    LIX
    LIXR
    LIKX
    Series
    For wheel Ø
    Load capacity
    Bracket structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Directional lock
    Options
    Matching fixed bracket series
    Additional considerations
    LI – heat-resistant pressed steel swivel bracket with top plate
    80–200 mm
    up to 400 kg
    pressed steel, double ball bearing in the swivel head, strong central kingpin, smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process used for the swivel head, swivel head play is set specifically for high-temperature applications
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -35 °C to +270 °C temporarily up to +300 °C
    top plate
    • teflon-coated stainless steel axle tube (-XAT)
    B, BI
    • passivation may be altered slightly in high temperatures, corrosion protection will remain unaffected
    LIR – heat-resistant pressed steel swivel bracket with bolt hole
    80–125 mm
    up to 150 kg
    pressed steel, double ball bearing in the swivel head, strong central kingpin, smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process used for the swivel head, swivel head play is set specifically for high-temperature applications
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -35 °C to +270 °C temporarily up to +300 °C
    bolt hole
    • teflon-coated stainless steel axle tube (-XAT)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    • passivation may be altered slightly in high temperatures, corrosion protection will remain unaffected
    LIK – Heat-resistant pressed steel swivel bracket, heavy-duty design, with top plate
    100–125 mm
    up to 350 kg
    strong pressed steel, double ball bearing in the swivel head, smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process used for the swivel head, swivel head play is set specifically for high-temperature applications
    zinc-plated, blue-passivated, Cr6-free
    ball protection due to highly heat-resistant sealing ring
    maintenance-free, long-life grease
    -35 °C to +270 °C temporarily up to +300 °C
    top plate
    • teflon-coated stainless steel axle tube (-XAT)
    BK, BIK
    • passivation may be altered slightly in high temperatures, corrosion protection will remain unaffected
    LIO – LIO Heat-resistant, heavy-duty welded steel swivel bracket
    125–250 mm
    up to 1,200 kg
    solid welded steel construction, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially-shaped, hardened bearing seats, grease nipple, bolted and secured welded central kingpin, extremely strong, swivel head play is set specifically for high-temperature applications
    zinc-plated, blue-passivated, Cr6-free
    ball protection due to labyrinth design
    maintenance-free, long-life grease
    -35 °C to +270 °C temporarily up to +300 °C
    top plate
    BO
    • passivation may be altered slightly in high temperatures, corrosion protection will remain unaffected
    LIX – Heat-resistant stainless steel swivel bracket with top plate
    80–200 mm
    up to 400 kg
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin, smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process used for the swivel head, swivel head play is set specifically for high-temperature applications, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -35 °C to +270 °C temporarily up to +300 °C
    top plate
    • grease-free swivel head (-OF)
    • teflon-coated stainless steel axle tube (-XAT)
    BX
    LIXR – Heat-resistant stainless steel swivel bracket with bolt hole
    80–125 mm
    up to 150 kg
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin, smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process used for the swivel head, swivel head play is set specifically for high-temperature applications, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -35 °C to +270 °C temporarily up to +300 °C
    bolt hole
    • grease-free swivel head (-OF)
    • teflon-coated stainless steel axle tube (-XAT)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LIKX – Heat-resistant stainless steel swivel bracket, heavy-duty design, with top plate
    100–125 mm
    up to 300 kg
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process used for the swivel head, swivel head play is set specifically for high-temperature applications, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    ball protection due to highly heat-resistant sealing ring
    maintenance-free, long-life grease
    -35 °C to +270 °C temporarily up to +300 °C
    top plate
    • teflon-coated stainless steel axle tube (-XAT)
    BKX
  • Compact castors swivel bracket / levelling castor swivel bracket
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LD
    HRLK
    HRLK-HN
    HRLKF
    HRLK-VS
    HRIG
    HRP-HRSP
    HRLH-HRLHD
    HRLSD
    HRLK-HYD
    Series
    For wheel Ø
    Load capacity
    Bracket structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Directional lock
    Options
    Matching fixed bracket series
    Additional considerations
    LD – Swivel bracket for twin wheel compact castor
    50–60 mm
    up to 250 kg
    zinc die-cast, high-quality ball bearing in the swivel head, zinc-plated steel threaded pin
    steel threaded pin zinc-plated, blue-passivated, Cr6-free
    maintenance-free, long-life grease
    -20 °C to +60 °C
    threaded pin
    –
    HRLK – Levelling castor pressed steel swivel bracket with fixed operating lever, with top plate fitting
    75–100 mm
    up to 300 kg
    strong pressed steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, steel truck lock, height adjustment with lever
    More information is available here.
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -30 °C to +70 °C
    top plate
    –
    • ergonomic lever
    • fixed position lever for ease of use of the lever
    • high floor clearance in the travel position
    HRLK...-HN – Levelling castor pressed steel swivel bracket with swivelling operating and release lever, with top plate fitting
    80 mm
    up to 250 kg
    strong pressed steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, steel truck lock, height adjustment with swiveling operating and release lever
    To the product video
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -30 °C to +70 °C
    top plate
    –
    • low force required to release and activate the truck lock
    • operating and release lever can be pivoted under the edge of the unit
    • high floor clearance in the travel position
    HRLK...-F – Levelling castors with fi xed lock and height-adjustable wheel with top plate
    80 mm
    up to 150 kg
    strong pressed steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, steel truck lock, height adjustment with swiveling operating lever
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -30 °C to +70 °C
    top plate
    –
    • very good stability
    • low force required to make height adjustments to the wheel
    • lever can be pivoted under the edge of the unit
    HRLK...-VS – Height adjustment castor pressed steel swivel bracket with adjustment screw, with top plate fitting
    80–100 mm
    up to 280 kg
    strong pressed steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, total height can be adjusted when stationary with adjustment screw (SW17), wheel locked in place with adjustment screw is used
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -30 °C to +70 °C
    top plate
    –
    • wheel locking when height adjustment is active
    • battery-powered screwdriver can be used to make height adjustments quickly
    HRIG – Levelling castor swivel bracket with bolt hole (female thread)
    45–72 mm
    up to 750 kg
    die-cast aluminium, high-quality ball bearing in the swivel head, hexagonal steel top plate, truck lock made of hard rubber, height adjustment using wrench or integrated adjustment wheel
    powder-coated
    sealing ring
    maintenance-free, long-life grease
    -10 °C to +90 °C
    bolt hole (female thread)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    HRP / HRSP – Levelling castor swivel bracket with top plate
    45–90 mm
    2,000 kg
    die-cast aluminium, high-quality ball bearing in the swivel head, steel top plate, truck lock made of hard rubber (HRSP: truck lock made of aluminium), height adjustment using wrench or integrated adjustment wheel, series HRSP with wrench only
    powder-coated
    sealing ring
    maintenance-free, long-life grease
    -10 °C to +90 °C
    top plate
    –
    • compact mounting height
    HRLH / HRLHD – Levelling castor pressed steel swivel bracket, heavy-duty design, with top plate
    75 mm
    up to 600 kg
    strong pressed steel, heavy fork and top plate, double ball bearing in the swivel head, bolted and secured central kingpin, extremely strong, minimum wear at high load, particularly resistant to shocks and impact due to four specially-shaped, hardened bearing seats, steel truck lock, height adjustment with wrench
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °C to +90 °C
    top plate
    –
    • also available as twin wheel swivel castor
    • high floor clearance in the travel position
    • excellent stability
    HRLSD – Heavy-duty, welded steel levelling castor twin wheel swivel bracket with top plate, heavy-duty swivel head
    125 mm
    up to 1,300 kg
    particularly robust welded steel construction, axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head, grease nipple, bolted and secured welded central kingpin, extremely strong, wheels and truck lock can be levelled using a wrench (SW24)
    zinc-plated, yellow-passivated, Cr6-free
    ball protection due to sealing ring and labyrinth design
    maintenance-free, long-life grease
    -30 °C to +100 °C
    top plate
    –
    • excellent stability
    • particularly large adjustment range
    HRLK...-HYD – Levelling castor pressed steel swivel bracket, medium-duty version for hydraulic levelling castor set
    100 mm
    up to 750 kg (set)
    strong pressed steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, steel truck lock with base plate made of thermoplastic rubber-elastomer
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    0 °C to +40 °C
    top plate
    –
    • centralised, synchronised and ergonomic lifting of four levelling castors by means of a hydraulic pump
    • low-noise activation
    • very low force required
    • high floor clearance in the travel position
  • Progressus brand stainless steel swivel bracket
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LPX
    LPZ
    Series
    For wheel Ø
    Load capacity
    Bracket structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Directional lock
    Options
    Matching fixed bracket series
    Additional considerations
    LPX – Stainless steel swivel bracket with top plate
    84–186 mm
    200 kg
    precision fork head made from corrosion- resistant steel (1.4034/AISI304), four-point ball bearing for extremely heavy loads, grease nipple, fork made from corrosion-resistant stainless steel (1.4301/AISI 304)
    fork head polished, fork vibration-ground finished
    ball protection from special design of precision fork head and an o-ring
    maintenance-free, long-life grease
    -30 °C to +134 °C
    top plate
    • with side wheel brake (-SRA)
    • with directional lock (-RI)
    –
    • suitable for autoclaves
    LPZ – Hospital bed castors with stem fitting and integrated switching cam
    150 mm
    200 kg
    precision fork head made from mild steel, four-point ball bearing for extremely heavy loads, grease nipple, fork made from corrosion-resistant stainless steel (1.4301/AISI 304)
    fork head chrome plated, fork vibration- ground fi nished
    ball protection from special design of precision fork head and an o-ring
    maintenance-free, long-life grease
    -30 °C to +134 °C
    stem
    • with central and directional lock (-CS11RI2)
    • load-dependent directional latch with ball pressure screw (-RIR22)
    –
    • suitable for autoclaves