VSVU, VSB – wheel series
Basic wheels
The tread in the VSB and VSVU basic wheel series is directly cast onto a steel wheel centre with a hole. This is made from the high-quality polyurethane-elastomer Blickle Besthane® or Vulkollan® with a hardness of 92 Shore A. The tread has a high dynamic load capacity and can be used at speeds up to 16 km/h. It also provides high cut and tear propagation resistance.
The wheel centre of the VSB and VSVU wheel series is easy to machine individually, allowing it to be tailored to specific requirements. The GB or GVU series can be used as a running wheel.
-
VSVU, VSB – Wheels
Wheels in the VSVU and VSB series are available in sizes 125 to 300 mm and have a hole in the wheel centre.
Wheel Ø
[mm]Wheel
width
[mm]Load capacity
at 4 km/h
[kg]Load capacity
at 10 km/h
[kg]Load capacity
at 16 km/h
[kg]Hub
length
[mm]Internal clamping
surface
[mm]External clamp-
ing surface
[mm]VSB 127/20H7 125 50 700 490 280 50 70 90 VSVU 127/20H7 125 50 700 490 280 50 70 90 VSB 150/20H7 150 50 800 560 320 50 80 100 VSVU 150/20H7 150 50 800 560 320 50 80 100 VSB 160/20H7 160 50 800 560 320 50 90 110 VSVU 160/20H7 160 50 800 560 320 50 90 110 VSB 200/20H7 200 50 1,000 700 400 50 110 150 VSVU 200/20H7 200 50 1,000 700 400 50 110 150 VSB 202/20H7 200 80 1,600 1,150 640 80 110 150 VSVU 202/20H7 200 80 1,600 1,150 640 80 110 150 VSB 251/25H7 250 50 1,250 870 500 50 150 190 VSVU 251/25H7 250 50 1,250 870 500 50 150 190 VSB 252/25H7 250 80 1,800 1,250 720 80 150 190 VSVU 252/25H7 250 80 1,800 1,250 720 80 150 190 VSB 302/30H7 300 80 2,400 1,650 960 80 150 230 VSVU 302/30H7 300 80 2,400 1,650 960 80 150 230