GEV – Wheel and castor series

Heavy duty wheels and castors with elastic solid rubber tyres and cast iron wheel centre

GEV wheel and castor series with elastic solid rubber tyres

The high quality elastic solid rubber tyres in the GEV series are steel-wire reinforced and have a hardness of 65 Shore A. The wheel centre with a grease nipple is made from rugged grey cast iron. In addition to a low level of rolling resistance, the wheels are quiet and provide good floor preservation. The wheels can also be used for higher speeds up to 16 km/h with a reduced load capacity.

The GEV wheel series is also available as a drive wheel (GEVN series)or as a hub fitting wheel (GEVA series) .

  • GEV – Wheels
    GEV wheels

    The wheels in the GEV series come in sizes ranging between 250 and 620 mm in diameter as standard along with a ball bearing.


    		Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Load capacity
    at 10 km/h
    [kg]    		 Load capacity
    at 16 km/h
    [kg]    		 Bearing type


    		 Axle bore Ø

    [mm]    		 Hub
    length
    [mm]
    To the product finder
  • GEV – Swivel castors with plate
    GEV swivel castors with plate

    Wheels in the GEV series are available with a welded steel bracket:

    LS series: Heavy duty welded steel swivel bracket with top plate fitting, heavy duty swivel head

    The brake system versions available for each base product are listed in the relevant section. A detailed description of the bracket series is available in our guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LS-GEV 302K 300 90 1,080 ball bearing 355 200 x 160 160 x 120 14 85
    LS-GEV 400K 400 75 1,200 ball bearing 470 200 x 160 160 x 120 14 100
    LS-GEV 520K 520 100 1,830 ball bearing 580 200 x 160 160 x 120 14 125
    LS-GEV 620K 620 200 4,540 ball bearing 710 255 x 200 210 x 160 18 130
    To the product finder
  • GEV – Fixed castors
    GEV fixed castors

    Blickle also provides a castor with a fixed bracket to match the welded steel swivel castor:

    BS series: Heavy duty welded steel fixed bracket with top plate fitting, heavy duty design

    A detailed description of the bracket series is available in our guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]
    BS-GEV 302K 300 90 1,080 ball bearing 355 200 x 160 160 x 120 14
    BS-GEV 400K 400 75 1,200 ball bearing 470 200 x 160 160 x 120 14
    BS-GEV 520K 520 100 1,830 ball bearing 580 200 x 160 160 x 120 14
    BS-GEV 620K 620 200 4,540 ball bearing 710 250 x 270 210 x 160 18
    To the product finder