Premium rubber wheels and rubber wheel castors - GEV series

With elastic solid rubber tyres and cast iron wheel centre

The high quality elastic solid rubber tyres in the GEV series are steel-wire reinforced and have a hardness of 65 Shore A. The wheel centre with a grease nipple is made from rugged grey cast iron. In addition to a low level of rolling resistance, the wheels are quiet and provide good floor preservation. The wheels can also be used for higher speeds up to 16 km/h with a reduced load capacity.

The GEV wheel series is also available as a drive wheel (GEVN series)or as a hub fitting wheel (GEVA series) .

  • GEV – Wheels

    The wheels in the GEV series come in sizes ranging between 250 and 620 mm in diameter as standard along with a ball bearing.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Load capacity
    at 10 km/h
    [kg]
    Load capacity
    at 16 km/h
    [kg]
    Bearing type


    Axle bore Ø

    [mm]
    Hub
    length
    [mm]
    GEV 254/30K 250 130 1,270 875 800 ball bearing 30 130
    GEV 280/25K 280 75 870 580 440 ball bearing 25 90
    GEV 302/35K 300 90 1,080 720 540 ball bearing 35 90
    GEV 360/30K 360 60 900 600 450 ball bearing 30 75
    GEV 362/35K 360 75 1,140 760 570 ball bearing 35 90
    GEV 400/30K 400 75 1,200 800 600 ball bearing 30 90
    GEV 405/45K 405 130 1,800 1,200 900 ball bearing 45 130
    GEV 425/45K 425 150 2,160 1,450 1,100 ball bearing 45 150
    GEV 500/35K 500 85 1,560 1,050 780 ball bearing 35 90
    GEV 520/40K 520 100 1,830 1,225 920 ball bearing 40 100
    GEV 550/60K 550 160 2,700 1,800 1,350 ball bearing 60 160
    GEV 610/60K 610 150 2,700 1,800 1,350 ball bearing 60 150
    GEV 620/65K 620 200 4,540 3,105 2,835 ball bearing 65 200
  • GEV – Swivel castors with plate

    Wheels in the GEV series are available with a welded steel bracket:

    LS series: Heavy duty welded steel swivel bracket with top plate fitting, heavy duty swivel head

    The brake system versions available for each base product are listed in the relevant section. A detailed description of the bracket series is available in our guide.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    Offset

    [mm]
    LS-GEV 302K 300 90 1,080 ball bearing 355 200 x 160 160 x 120 14 85
    LS-GEV 400K 400 75 1,200 ball bearing 470 200 x 160 160 x 120 14 100
    LS-GEV 520K 520 100 1,830 ball bearing 580 200 x 160 160 x 120 14 125
    LS-GEV 620K 620 200 4,540 ball bearing 710 255 x 200 210 x 160 18 130
  • GEV – Fixed castors

    Blickle also provides a castor with a fixed bracket to match the welded steel swivel castor:

    BS series: Heavy duty welded steel fixed bracket with top plate fitting, heavy duty design

    A detailed description of the bracket series is available in our guide.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    BS-GEV 302K 300 90 1,080 ball bearing 355 200 x 160 160 x 120 14
    BS-GEV 400K 400 75 1,200 ball bearing 470 200 x 160 160 x 120 14
    BS-GEV 520K 520 100 1,830 ball bearing 580 200 x 160 160 x 120 14
    BS-GEV 620K 620 200 4,540 ball bearing 710 250 x 270 210 x 160 18