Compact castor series

Small castors with a high load capacity

The Blickle compact castors are available as single castors with a bolt hole or top plate fitting. Twin compact castors are available with a top plate fitting or a steel threaded pin. The single compact castors are frequently used in combination with the VSTH wheel series with a polyurethane tread, nylon POA and PO, compressed cast nylon GSPO, POEV with elastic solid rubber or steel SVS. The twin compact castors also use the heavy duty nylon SPO wheel series, the SE series with an elastic solid rubber tread, and ALTH and ALST series with a polyurethane tread and aluminium wheel centre.

  • Compact castors with top plate fitting

    The Blickle compact castors are available with the following bracket series with top plate fitting in combination with the POEV, VSTH, POA, PO or GSPO wheel series:

    LPA/LKPA series: Light duty swivel bracket with top plate fitting
    LE series: Pressed steel swivel castor with top plate fitting
    L series: Pressed steel swivel bracket with top plate fitting, medium duty design
    LK series: Pressed steel swivel bracket with top plate fitting, heavy duty design
    LH series: Pressed steel swivel bracket with top plate fitting, heavy duty design

    A detailed description and a comparison of the bracket series are available in our guide. The brake systems available for each base product are listed in the relevant section.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 3 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    Offset

    [mm]
    LPA-POA 35G 35 25 75 plain bore 52 60 x 60 38 x 38 / 48 x 48 6,2 15
    LPA-VSTH 35K 35 27 100 ball bearing 52 60 x 60 38 x 38 / 48 x 48 6,2 15
    LPA-GSPO 35K 35 28 100 ball bearing 52 60 x 60 38 x 38 / 48 x 48 6,2 15
    LKPA-POA 52G 50 29 120 plain bore 73 90 x 66 75 x 45 / 61 x 51 8,5 29
    LKPA-GSPO 50K 50 32 150 ball bearing 73 90 x 66 75 x 45 / 61 x 51 8,5 29
    LKPA-VSTH 50K 50 33 150 ball bearing 73 90 x 66 75 x 45 / 61 x 51 8,5 29
    LE-PO 60G 60 29 150 plain bore 80 100 x 85 80 x 60 9 35
    LE-PO 60KF 60 32 150 ball bearing (C) 80 100 x 85 80 x 60 9 35
    L-GSPO 60K 60 32 250 ball bearing 80 100 x 85 80 x 60 9 35
    LE-POEV 60KF 60 34 120 ball bearing (CC) 80 100 x 85 80 x 60 9 35
    L-VSTH 60K 60 35 200 ball bearing 80 100 x 85 80 x 60 9 35
    LH-VSTH 62K 60 60 320 ball bearing 92 100 x 85 80 x 60 9 45
    LH-GSPO 65K 65 40 650 ball bearing 97 100 x 85 80 x 60 9 45
    LH-SVS 65K 65 40 700 ball bearing 97 100 x 85 80 x 60 9 45
    LK-GSPO 65K 65 40 350 ball bearing 90 100 x 85 80 x 60 9 40
    LK-VSTH 65K 65 40 250 ball bearing 90 100 x 85 80 x 60 9 40
    LH-SPO 75G 75 32 300 plain bore 118 100 x 85 80 x 60 9 45
    LH-SPO 75K 75 32 300 ball bearing 118 100 x 85 80 x 60 9 45
    LH-SPO 80K 80 37 350 ball bearing 120 100 x 85 80 x 60 9 45
    LH-GSPO 80K 80 40 700 ball bearing 120 100 x 85 80 x 60 9 45
    LH-SVS 80K 80 40 700 ball bearing 120 100 x 85 80 x 60 9 45
    LH-VSTH 80K 80 40 280 ball bearing 120 100 x 85 80 x 60 9 45
    LH-SPO 82K 80 70 650 ball bearing 112 100 x 85 80 x 60 9 45
    LH-VSTH 82K 80 70 500 ball bearing 112 100 x 85 80 x 60 9 45
  • Compact castors with bolt hole

    Blickle compact castors are also available with a bolt hole fitting as an alternative to a plate fitting:

    LRA/LKRA series: Light duty swivel bracket with bolt hole
    LER series: Pressed steel swivel castor with bolt hole
    LR series: Pressed steel swivel bracket with bolt hole, medium duty design
    LKR series: Pressed steel swivel bracket with bolt hole, heavy duty design

    These brackets are combined with the wheels in the POEV, VSTH, POA, PO or GSPO series.

    The guide provides a detailed comparison of the bracket series which are available. The brake system versions available for each base product are covered in greater detail in the relevant section.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 3 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate Ø

    [mm]
    Bolt
    hole Ø
    [mm]
    Offset

    [mm]
    LRA-POA 35G 35 25 75 plain bore 50 43 11 15
    LRA-VSTH 35K 35 27 100 ball bearing 50 43 11 15
    LRA-GSPO 35K 35 28 100 ball bearing 50 43 11 15
    LKRA-POA 52G 50 29 120 plain bore 70 57 13 29
    LKRA-GSPO 50K 50 32 150 ball bearing 70 57 13 29
    LKRA-VSTH 50K 50 33 150 ball bearing 70 57 13 29
    LER-PO 60G 60 29 150 plain bore 80 70 13 35
    LR-GSPO 60K 60 32 250 ball bearing 80 70 13 35
    LER-PO 60KF 60 32 150 ball bearing (C) 80 70 13 35
    LER-POEV 60KF 60 34 120 ball bearing (CC) 80 70 13 35
    LR-VSTH 60K 60 35 200 ball bearing 80 70 13 35
    LKR-GSPO 65K 65 40 350 ball bearing 88 88 13 41
    LKR-VSTH 65K 65 40 250 ball bearing 88 88 13 41
  • Compact castors with fixed bracket

    The POEV, VSTH, POA, PO or GSPO wheel series are available with fixed brackets corresponding to the compact castors with top plate fitting:

    B series: Pressed steel fixed bracket with top plate fitting, medium duty design
    BK series: Pressed steel fixed bracket with top plate fitting, heavy duty design
    BH series: Pressed steel fixed bracket with top plate fitting, heavy duty design

    A detailed description of the bracket series is available in our guide.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 3 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    B-PO 60G 60 29 150 plain bore 80 100 x 85 80 x 60 9
    B-GSPO 60K 60 32 250 ball bearing 80 100 x 85 80 x 60 9
    B-PO 60KF 60 32 150 ball bearing (C) 80 100 x 85 80 x 60 9
    B-POEV 60KF 60 34 120 ball bearing (CC) 102 100 x 85 80 x 60 9
    B-VSTH 60K 60 35 200 ball bearing 80 100 x 85 80 x 60 9
    BH-GSPO 65K 65 40 650 ball bearing 97 100 x 85 80 x 60 9
    BH-SVS 65K 65 40 700 ball bearing 97 100 x 85 80 x 60 9
    BK-GSPO 65K 65 40 350 ball bearing 90 100 x 85 80 x 60 9
    BK-VSTH 65K 65 40 250 ball bearing 90 100 x 85 80 x 60 9
    BH-SPO 75G 75 32 300 plain bore 118 100 x 85 80 x 60 9
    BH-SPO 75K 75 32 300 ball bearing 118 100 x 85 80 x 60 9
    BH-SPO 80K 80 37 350 ball bearing 120 100 x 85 80 x 60 9
    BH-GSPO 80K 80 40 700 ball bearing 120 100 x 85 80 x 60 9
    BH-SVS 80K 80 40 700 ball bearing 120 100 x 85 80 x 60 9
    BH-VSTH 80K 80 40 280 ball bearing 120 100 x 85 80 x 60 9
  • LD, LHD and LSD series twin wheel compact castors

    The twin wheel compact castors are available with three different bracket versions. These are combined with seven different wheel series made of nylon, with either a polyurethane tread or an elastic solid rubber tread.

    LD series: Pressed steel twin wheel compact castor with threaded pin
    LHD series: Heavy duty pressed steel twin wheel compact castor with top plate fitting
    LSD series: Heavy duty welded steel twin wheel compact castor with top plate fitting

    A detailed description and a comparison of the bracket series are available in our guide. The brake systems available for each base product are listed in the relevant section.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Number of
    wheels

    Total castor
    width
    [mm]
    Load capacity
    at 3 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Thread


    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    Offset

    [mm]
    LD-POA 52G 50 29 2 95 210 plain bore 56 M16 39
    LD-VSTH 50K 50 33 2 100 250 ball bearing 56 M16 39
    LD-PO 60G 60 29 2 105 250 plain bore 65 M16 39
    LHD-GSPO 60K 60 32 2 630 ball bearing 92 100 x 85 80 x 60 9 40
    LD-POEV 60KF 60 34 2 105 240 ball bearing (CC) 65 M16 39
    LHD-POEV 60KF 60 34 2 210 ball bearing (CC) 92 100 x 85 80 x 60 9 40
    LD-VSTH 60K 60 35 2 105 250 ball bearing 65 M16 39
    LHD-VSTH 60K 60 35 2 360 ball bearing 92 100 x 85 80 x 60 9 40
    LHD-SPO 75K 75 32 2 ball bearing 110 100 x 85 80 x 60 9 45
    LHD-ALBS 80K 80 30 2 360 ball bearing 112 100 x 85 80 x 60 9 45
    LHD-ALST 80K 80 30 2 360 ball bearing 112 100 x 85 80 x 60 9 45
    LHD-ALTH 80K 80 30 2 360 ball bearing 112 100 x 85 80 x 60 9 45
    LHD-POEV 80KF 80 32 2 250 ball bearing (C) 112 100 x 85 80 x 60 9 45
    LHD-VSTH 80K 80 40 2 500 ball bearing 115 140 x 110 105 x 75–80 11 45
    LSD-GSPO 80K 80 40 2 1.750 ball bearing 125 140 x 110 105 x 75–80 11 40
    LHD-SE 80K 80 45 2 360 ball bearing 115 140 x 110 105 x 75–80 11 45