ALBS – Wheel and castor series

Heavy duty wheels and castors with Blickle Besthane® Soft polyurethane tread and aluminium wheel centre

The tread of the ALBS series consists of the high-quality polyurethane-elastomer Blickle Besthane® Soft. This is cast onto a wheel centre made of die-cast aluminium. The extra-thick and elastic tread has a hardness of 75 Shore A. It has a high dynamic load capacity and a particularly low level of rolling resistance. In addition to providing a very high level of operational comfort, the wheel series also offers particularly low noise levels and good floor preservation.

The ALBS series is used for applications requiring excellent operational comfort on uneven surfaces. The series can also be used for high speed applications up to 16 km/h with a reduced load capacity.
The POBS series is used in situation were hydrolysis resistance is an important factor.

ALBS – Wheels

The wheels in the ALBS series come in sizes ranging between 80 and 300 mm in diameter in combination with a ball bearing. The wheels are also available with a crowned tread.

	Wheel Ø [mm]	Wheel width [mm]	Load capacity at 4 km/h [kg]	Load capacity at 10 km/h [kg]	Load capacity at 16 km/h [kg]	Bearing type	Axle bore Ø [mm]	Hub length [mm]
ALBS 80/15K	80	30	200			ball bearing	15	35	To the product
ALBS 82/15K	80	40	230			ball bearing	15	40	To the product
ALBS 100/15K	100	40	320			ball bearing	15	40	To the product
ALBS 125/15K	125	40	370			ball bearing	15	45	To the product
ALBS 127/20K	125	54	450	220	180	ball bearing	20	60	To the product
ALBS 150/20K	150	50	500	250	200	ball bearing	20	60	To the product
ALBS 160/20K	160	50	580	290	230	ball bearing	20	60	To the product
ALBS 181/20K	180	44	450	220	180	ball bearing	20	44	To the product
ALBS 180/20K	180	50	670	335	240	ball bearing	20	60	To the product
ALBS 200/20K	200	50	750	370	300	ball bearing	20	60	To the product
ALBS 250/20K	250	50	850	400	320	ball bearing	20	60	To the product
ALBS 250/25K	250	50	850	400	320	ball bearing	25	60	To the product
ALBS 300/25K	300	60	1,150	570	460	ball bearing	25	70	To the product

To the product finder

ALBS – Swivel castors with plate

As standard, the ALBS wheel series is available with various bracket series with a top plate fitting. These vary in terms of their design and load capacity:

LK series: Pressed steel swivel bracket with top plate fitting, heavy duty design
LH series: Pressed steel swivel bracket with top plate fitting, heavy duty design
LUH series: Pressed steel swivel bracket with top plate fitting, heavy duty enclosed design
LS series: Heavy duty welded steel swivel bracket with top plate fitting, heavy duty swivel head

A detailed description and a comparison of the bracket series are available in our guide. The brake systems available for each base product are covered in the relevant section.

	Wheel Ø [mm]	Wheel width [mm]	Load capacity at 4 km/h [kg]	Bearing type	Total height [mm]	Plate dimensions [mm]	Bolt hole spacing [mm]	Bolt hole Ø [mm]	Offset [mm]
LH-ALBS 82K	80	40	230	ball bearing	120	100 x 85	80 x 60	9	45	To the product
LK-ALBS 82K	80	40	230	ball bearing	110	100 x 85	80 x 60	9	40	To the product
LH-ALBS 100K-1	100	40	320	ball bearing	140	100 x 85	80 x 60	9	45	To the product
LH-ALBS 100K-3	100	40	320	ball bearing	140	140 x 110	105 x 75–80	11	45	To the product
LK-ALBS 100K-1	100	40	320	ball bearing	130	100 x 85	80 x 60	9	45	To the product
LK-ALBS 100K-3	100	40	320	ball bearing	130	140 x 110	105 x 75–80	11	45	To the product
LK-ALBS 125K-1	125	40	350	ball bearing	155	100 x 85	80 x 60	9	48	To the product
LK-ALBS 125K-3	125	40	350	ball bearing	155	140 x 110	105 x 75–80	11	48	To the product
LH-ALBS 125K-1	125	40	370	ball bearing	165	100 x 85	80 x 60	9	45	To the product
LH-ALBS 125K-3	125	40	370	ball bearing	165	140 x 110	105 x 75–80	11	45	To the product
LH-ALBS 127K	125	54	450	ball bearing	170	140 x 110	105 x 75–80	11	55	To the product
LK-ALBS 127K	125	54	450	ball bearing	170	140 x 110	105 x 75–80	11	55	To the product
LS-ALBS 127K	125	54	450	ball bearing	170	140 x 110	105 x 75–80	11	50	To the product
LUH-ALBS 127K	125	54	450	ball bearing	170	140 x 110	105 x 75–80	11	55	To the product
LH-ALBS 150K	150	50	500	ball bearing	197	140 x 110	105 x 75–80	11	65	To the product
LK-ALBS 150K	150	50	500	ball bearing	197	140 x 110	105 x 75–80	11	60	To the product
LS-ALBS 150K	150	50	500	ball bearing	200	140 x 110	105 x 75–80	11	55	To the product
LUH-ALBS 150K	150	50	500	ball bearing	197	140 x 110	105 x 75–80	11	61	To the product
LH-ALBS 160K	160	50	580	ball bearing	202	140 x 110	105 x 75–80	11	65	To the product
LK-ALBS 160K	160	50	580	ball bearing	202	140 x 110	105 x 75–80	11	60	To the product
LS-ALBS 160K	160	50	580	ball bearing	205	140 x 110	105 x 75–80	11	55	To the product
LUH-ALBS 160K	160	50	580	ball bearing	202	140 x 110	105 x 75–80	11	61	To the product
LK-ALBS 180K	180	50	600	ball bearing	223	140 x 110	105 x 75–80	11	65	To the product
LH-ALBS 180K	180	50	670	ball bearing	223	140 x 110	105 x 75–80	11	67	To the product
LK-ALBS 200K	200	50	600	ball bearing	245	140 x 110	105 x 75–80	11	62	To the product
LH-ALBS 200K	200	50	750	ball bearing	245	140 x 110	105 x 75–80	11	70	To the product
LS-ALBS 200K	200	50	750	ball bearing	245	140 x 110	105 x 75–80	11	60	To the product
LUH-ALBS 200K	200	50	750	ball bearing	245	140 x 110	105 x 75–80	11	63	To the product
LH-ALBS 250K	250	50	850	ball bearing	295	140 x 110	105 x 75–80	11	82	To the product
LS-ALBS 250K	250	50	850	ball bearing	305	175 x 140	140 x 105	14	75	To the product
LS-ALBS 300K	300	60	1,150	ball bearing	355	175 x 140	140 x 105	14	85	To the product

To the product finder

ALBS – Swivel castors with bolt hole

The ALBS series is available with a bolt hole fitting as an alternative to a plate fitting:

LKR series: Pressed steel swivel bracket with bolt hole, heavy duty design

A comparison of the two bracket series is available in the guide. The brake system versions available for each base product are covered in greater detail in the relevant section.

	Wheel Ø [mm]	Wheel width [mm]	Load capacity at 4 km/h [kg]	Bearing type	Total height [mm]	Plate Ø [mm]	Bolt hole Ø [mm]	Offset [mm]
LKR-ALBS 82K	80	40	230	ball bearing	110	88	13	40	To the product
LKR-ALBS 100K	100	40	320	ball bearing	130	88	13	45	To the product
LKR-ALBS 125K	125	40	350	ball bearing	155	88	13	48	To the product

To the product finder

ALBS – Fixed castors

Blickle also provides wheels with a suitable fixed bracket for all of the swivel castor series:

BK series: Pressed steel fixed bracket with top plate fitting, heavy duty design
BH series: Pressed steel fixed bracket with top plate fitting, heavy duty design
BS series: Heavy duty welded steel fixed bracket with top plate fitting

A detailed description of the fixed castor bracket series is available in our guide.

	Wheel Ø [mm]	Wheel width [mm]	Load capacity at 4 km/h [kg]	Bearing type	Total height [mm]	Plate dimensions [mm]	Bolt hole spacing [mm]	Bolt hole Ø [mm]
BH-ALBS 82K	80	40	230	ball bearing	120	100 x 85	80 x 60	9	To the product
BK-ALBS 82K	80	40	230	ball bearing	110	100 x 85	80 x 60	9	To the product
BH-ALBS 100K-1	100	40	320	ball bearing	140	100 x 85	80 x 60	9	To the product
BH-ALBS 100K-3	100	40	320	ball bearing	140	140 x 110	105 x 75–80	11	To the product
BK-ALBS 100K-1	100	40	320	ball bearing	130	100 x 85	80 x 60	9	To the product
BK-ALBS 100K-3	100	40	320	ball bearing	130	140 x 110	105 x 75–80	11	To the product
BH-ALBS 125K-1	125	40	370	ball bearing	165	100 x 85	80 x 60	9	To the product
BH-ALBS 125K-3	125	40	370	ball bearing	165	140 x 110	105 x 75–80	11	To the product
BK-ALBS 125K-1	125	40	350	ball bearing	155	100 x 85	80 x 60	9	To the product
BK-ALBS 125K-3	125	40	350	ball bearing	155	140 x 110	105 x 75–80	11	To the product
BH-ALBS 127K	125	54	450	ball bearing	170	140 x 110	105 x 75–80	11	To the product
BS-ALBS 127K	125	54	450	ball bearing	170	140 x 110	105 x 75–80	11	To the product
BH-ALBS 150K	150	50	500	ball bearing	197	140 x 110	105 x 75–80	11	To the product
BS-ALBS 150K	150	50	500	ball bearing	200	140 x 110	105 x 75–80	11	To the product
BH-ALBS 160K	160	50	580	ball bearing	202	140 x 110	105 x 75–80	11	To the product
BS-ALBS 160K	160	50	580	ball bearing	205	140 x 110	105 x 75–80	11	To the product
BH-ALBS 180K	180	50	670	ball bearing	223	140 x 110	105 x 75–80	11	To the product
BH-ALBS 200K	200	50	750	ball bearing	245	140 x 110	105 x 75–80	11	To the product
BS-ALBS 200K	200	50	750	ball bearing	245	140 x 110	105 x 75–80	11	To the product
BH-ALBS 250K	250	50	850	ball bearing	295	140 x 110	105 x 75–80	11	To the product
BS-ALBS 250K	250	50	850	ball bearing	305	175 x 140	140 x 105	14	To the product
BS-ALBS 300K	300	60	1,150	ball bearing	355	175 x 140	140 x 105	14	To the product

To the product finder

ALBS – Twin castors

ALBS – Twin wheel castors with Blickle Besthane Soft polyurethane tread

Twin castors are frequently used for high load capacities. The wheels in Blickle’s ALBS series are available in combination with two twin castor bracket types:

LHD series: Pressed steel twin wheel swivel bracket with top plate fitting, heavy duty design
BOD series: Heavy duty welded steel fixed bracket with top plate fitting

The specific features of each bracket series are covered in detail in the guide.

	Wheel Ø [mm]	Wheel width [mm]	Number of wheels	Load capacity at 4 km/h [kg]	Bearing type	Total height [mm]	Plate dimensions [mm]	Bolt hole spacing [mm]	Bolt hole Ø [mm]	Offset [mm]
LHD-ALBS 80K	80	30	2	360	ball bearing	112	100 x 85	80 x 60	9	45	To the product
BOD-ALBS 80K	80	30	2	400	ball bearing	115	140 x 110	105 x 75–80	11		To the product
BOD-ALBS 100K	100	40	2	640	ball bearing	145	140 x 110	105 x 75–80	11		To the product
LHD-ALBS 100K	100	40	2	640	ball bearing	145	140 x 110	105 x 75–80	11	45	To the product
BOD-ALBS 125K	125	40	2	740	ball bearing	170	140 x 110	105 x 75–80	11		To the product
LHD-ALBS 125K	125	40	2	740	ball bearing	170	140 x 110	105 x 75–80	11	50	To the product
LHD-ALBS 181K	180	44	2	800	ball bearing	235	140 x 110	105 x 75–80	11	65	To the product
BOD-ALBS 181K	180	44	2	800	ball bearing	235	140 x 110	105 x 75–80	11		To the product

To the product finder