POW – Wheel and castor series

Nylon wheels and castors with rubber damping ring

The wheels in the POW series are made from high-quality injection-moulded nylon. With a hardness of 70 Shore D, the wheels offer a particularly low level of rolling resistance on smooth surfaces and a high level of abrasion resistance. The elastic solid rubber damping ring reduces operating noise by up to 10 dB compared to other nylon wheels and castors.

The POW series is used when reduced noise emissions are required for typical applications for nylon wheels, such as the food industry oder der hygienic environments.

  • POW – Wheels

    The wheels in the POW series have diameters ranging between 100 and 125 mm as standard and come with a ball bearing. The wheels have a thread guard as standard, which is also available with an additional ball bearing seal.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Axle bore Ø

    [mm]
    Hub
    length
    [mm]
    POW 100/10KF 100 35 200 ball bearing (C) 10 46
    POW 100/8KF 100 35 200 ball bearing (C) 8 46
    POW 100/8KFD 100 35 200 ball bearing (C) 8 46
    POW 125/10KF 125 35 220 ball bearing (C) 10 46
    POW 125/8KF 125 35 220 ball bearing (C) 8 46
    POW 125/8KFD 125 35 220 ball bearing (C) 8 46
  • POW – Swivel castors with plate

    The POW wheel series is available with a variety of brackets with a plate fitting for a wide range of applications as standard. These vary in terms of their design:

    L series: Pressed steel swivel bracket with top plate fitting, medium duty design
    LK series: Pressed steel swivel bracket with top plate fitting, heavy duty design

    A detailed description and a comparison of both bracket series are available in our guide.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    Offset

    [mm]
    LK-POW 100KF-1 100 35 200 ball bearing (C) 130 100 x 85 80 x 60 9 45
    LK-POW 100KF-3 100 35 200 ball bearing (C) 130 140 x 110 105 x 75–80 11 45
    L-POW 100KF 100 35 200 ball bearing (C) 125 100 x 85 80 x 60 9 36
    LK-POW 125KF-1 125 35 220 ball bearing (C) 155 100 x 85 80 x 60 9 48
    LK-POW 125KF-3 125 35 220 ball bearing (C) 155 140 x 110 105 x 75–80 11 48
    L-POW 125KF 125 35 220 ball bearing (C) 150 100 x 85 80 x 60 9 38
  • POW – Fixed castors

    Blickle also provides suitable fixed castors in addition to swivel castors.

    B series: Pressed steel fixed bracket with top plate fitting, medium duty design
    BK series: Pressed steel fixed bracket with top plate fitting, heavy duty design

    A detailed description of both bracket series is available in our guide.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    BK-POW 100KF-1 100 35 200 ball bearing (C) 130 100 x 85 80 x 60 9
    BK-POW 100KF-3 100 35 200 ball bearing (C) 130 140 x 110 105 x 75–80 11
    B-POW 100KF 100 35 200 ball bearing (C) 125 100 x 85 80 x 60 9
    BK-POW 125KF-1 125 35 220 ball bearing (C) 155 100 x 85 80 x 60 9
    BK-POW 125KF-3 125 35 220 ball bearing (C) 155 140 x 110 105 x 75–80 11
    B-POW 125KF 125 35 220 ball bearing (C) 150 100 x 85 80 x 60 9